Z4T-W600MODULE

FCC ID

Equipment: W600 WiFi Module

Seeed Technology Co., Ltd. -W600MODULE

9F, G3 Building, TCL International E City, Zhongshanyuan Road,Nanshan District, Shenzhen, N/A 518055 China

Application
Frequency Range
Final Action Date
Granted
mksgzXLqNiFImzNBZaQg9w==
2412.0-2462.0
2019-09-10
APPROVED
mksgzXLqNiFImzNBZaQg9w==
2422.0-2452.0
2019-09-10
APPROVED
File NameDocument TypeDateDirect
RF exposure InfoRF Exposure Info 2019-09-10 00:00:00 pdf
Test ReportTest Report 2019-09-10 00:00:00 pdf
LabelID Label/Location Info 2019-09-10 00:00:00 pdf
Modular cover letterCover Letter(s) 2019-09-10 00:00:00 pdf
Channel StatementCover Letter(s) 2019-09-10 00:00:00 pdf
Confidentiality LetterCover Letter(s) 2019-09-10 00:00:00 pdf
POACover Letter(s) 2019-09-10 00:00:00 pdf
SchematicSchematics N/A
User ManualUsers Manual 2019-10-25 00:00:00 N/A
Block DiagramBlock Diagram N/A
External PhotosExternal Photos 2019-10-25 00:00:00 N/A
Internal PhotosInternal Photos 2019-10-25 00:00:00 N/A
Test Setup PhotosTest Setup Photos 2019-10-25 00:00:00 N/A
Operational DescriptionOperational Description N/A

Application Details:

EquipmentW600 WiFi Module
FRN0021206271
Grantee CodeZ4T
Product Code-W600MODULE
Applicant BusinessSeeed Technology Co., Ltd.
Business Address9F, G3 Building, TCL International E City, Zhongshanyuan Road,Nanshan District, Shenzhen,N/A China 518055
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantAlbert Miao – R&D; Director
Applicant Phone
Applicant Fax86 0755-33207095
Applicant Email[email protected]
Applicant MailStop
Test FirmSGS-CSTC Standards Technical Services Co., Ltd
Test Firm ContactKeny Xu
Test Firm Phone
Test Firm Fax
Test Firm Email[email protected]
Certified ByJoyce Shi – Certification Executive
Comment [mksgzXLqNiFImzNBZaQg9w==]: Power Output listed is conducted. Single modular approval. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz and 40MHz bandwidth modes

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC