Equipment: MW320

Globalscale Technologies INC MW320

5F, No. 2 Building, Minxing Industrial Park Minkang Road, Minzhi Street, Baoan District, Shenzhen, Guangdong, N/A N/A China

Frequency Range
Final Action Date
File NameDocument TypeDateDirect
User ManualUsers Manual 2020-03-24 00:00:00 pdf
Test Setup PhotosTest Setup Photos 2020-03-24 00:00:00 pdf
RF Exposure Evaluation-FCCRF Exposure Info 2020-03-24 00:00:00 pdf
Request Modular Transmitter ApprovalCover Letter(s) 2020-03-24 00:00:00 pdf
Test Report-DTSTest Report 2020-03-24 00:00:00 pdf
LabelID Label/Location Info 2020-03-24 00:00:00 pdf
Internal PhotosInternal Photos 2020-03-24 00:00:00 pdf
FCC POACover Letter(s) 2020-03-24 00:00:00 pdf
FCC Confidentiality request lettersCover Letter(s) 2020-03-24 00:00:00 pdf
External PhotosExternal Photos 2020-03-24 00:00:00 pdf
Declaration Letter of Not Use Channel 12 and 13Cover Letter(s) 2020-03-24 00:00:00 pdf
Appendix A Test Data for 2.4GWiFiTest Report 2020-03-24 00:00:00 pdf
Block DiagramBlock Diagram N/A
Operation DescriptionOperational Description N/A
Declaration concerning Antenna SpecificationOperational Description N/A
SchematicsSchematics N/A

Application Details:

Grantee CodeYCJ
Product CodeMW320
Applicant BusinessGlobalscale Technologies INC
Business Address5F, No. 2 Building, Minxing Industrial Park Minkang Road, Minzhi Street, Baoan District, Shenzhen, Guangdong, China
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantJoe Chen – PMP
Applicant Phone 201
Applicant Fax008675529500599
Applicant Email[email protected]
Applicant MailStop
Test FirmShenzhen LCS Compliance Testing Laboratory Ltd.
Test Firm ContactGavin Liang
Test Firm Phone
Test Firm Fax0755-82591132
Test Firm Email[email protected]
Certified ByJoe Chen – PMP
Comment [dOiYTpoJcgbdEl02qfdPug==]: Single Modular Approval. Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

© 2020 FCC.report
This site is not affiliated with or endorsed by the FCC