|Equipment||DIGITAL MOBILE RADIO|
|Applicant Business||Hytera Communications Corporation Limited|
|Business Address||Hytera Tower, Hi-Tech Industrial Park North, 9108# Beihuan Road, Nanshan District,, Shenzhen,N/A China 518057|
|TCB Scope||A4: UNII devices & low power transmitters using spread spectrum techniques|
|TCB Email||[email protected]|
|Applicant||Tiantian Chen – Certification Engineer |
|Applicant Phone|| |
|Applicant Email||[email protected]|
|Test Firm||Bay Area Compliance Laboratories Corp.(Dongguan)|
|Test Firm Contact||David Zhang|
|Test Firm Phone|| |
|Test Firm Fax|
|Test Firm Email||[email protected]|
|Certified By||Tiantian Chen – |
Comment [1N+m179XK4aQ8ezku6CMpA==]: Output power listed is conducted.
Comment [lq9MKbq8evyVX5OiLYB19g==]: Output power listed is conducted.
Comment [SfIsgF5XmbFRQj0siYFrZw==]: Output power listed is Maximum rated conducted at antenna terminal. Minimum output setting is 1 W. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 40 cm from all persons. A label, as described in this filing must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. RF exposure compliance may be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of Section 1.1307(b)(3).