Equipment: GEM3NFC

North Pole Engineering, Inc. -NPE109

221 N. 1st Street Suite 310, Minneapolis, MN 55401 United States

Frequency Range
Final Action Date
File NameDocument TypeDateDirect
Test Setup PhotosTest Setup Photos 2020-03-20 00:00:00 pdf
POACover Letter(s) 2020-03-20 00:00:00 pdf
Modular Approval LetterCover Letter(s) 2020-03-20 00:00:00 pdf
Internal PhotosInternal Photos 2020-03-20 00:00:00 pdf
Label and LocationID Label/Location Info 2020-03-20 00:00:00 pdf
User ManualUsers Manual 2020-03-20 00:00:00 pdf
External PhotosExternal Photos 2020-03-20 00:00:00 pdf
Test ReportTest Report 2020-03-20 00:00:00 pdf
Confidentiality Request LetterCover Letter(s) 2020-03-20 00:00:00 pdf
Block DiagramBlock Diagram N/A
Operational DescriptionOperational Description N/A
SchematicsSchematics N/A

Application Details:

Grantee CodeXRH
Product Code-NPE109
Applicant BusinessNorth Pole Engineering, Inc.
Business Address221 N. 1st Street Suite 310, Minneapolis,Minnesota United States 55401
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
TCB Email[email protected]
ApplicantRick Gibbs – VP Engineering
Applicant Phone 223
Applicant Fax6123050212
Applicant Email[email protected]
Applicant MailStop
Test FirmCTC Laboratories, Inc.
Test Firm ContactWalter Chen
Test Firm Phone 8008
Test Firm Fax
Test Firm Email[email protected]
Certified ByRick Gibbs – VP Engineering
Comment [NBVto22ICAO5sFiAQnwJHQ==]: Single Modular Approval. This module is to be used only for mobile and fixed applications. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

© 2020 FCC.report
This site is not affiliated with or endorsed by the FCC