XFF-BRD10

FCC ID

Equipment: Border router/Bridge

MMB Research Inc. -BRD10

25 Adelaide Street East, Suite 400, Toronto, N/A M5C3A1 Canada

Application
Frequency Range
Final Action Date
Granted
sSiuPb5XLgZNUbav/5LbJQ==
2402.0-2480.0
2019-08-09
APPROVED
sSiuPb5XLgZNUbav/5LbJQ==
2405.0-2480.0
2019-08-09
APPROVED
sSiuPb5XLgZNUbav/5LbJQ==
2412.0-2462.0
2019-08-09
APPROVED
sSiuPb5XLgZNUbav/5LbJQ==
2432.0-2432.0
2019-08-09
APPROVED
File NameDocument TypeDateDirect
User ManualUsers Manual 2019-08-09 00:00:00 pdf
Test Setup PhotosTest Setup Photos 2019-08-09 00:00:00 pdf
Test Report ZigbeeTest Report 2019-08-09 00:00:00 pdf
Test Report WiFiTest Report 2019-08-09 00:00:00 pdf
Test Report BLETest Report 2019-08-09 00:00:00 pdf
MPE Evaluation ZigbeeRF Exposure Info 2019-08-09 00:00:00 pdf
MPE Evaluation WiFiRF Exposure Info 2019-08-09 00:00:00 pdf
MPE Evaluation BLERF Exposure Info 2019-08-09 00:00:00 pdf
Modular RequestCover Letter(s) 2019-08-09 00:00:00 pdf
Internal PhotosInternal Photos 2019-08-09 00:00:00 pdf
ID Label and Location InfoID Label/Location Info 2019-08-09 00:00:00 pdf
External PhotosExternal Photos 2019-08-09 00:00:00 pdf
Cover LetterCover Letter(s) 2019-08-09 00:00:00 pdf
Confidentiality RequestCover Letter(s) 2019-08-09 00:00:00 pdf
Agent AuthorizationCover Letter(s) 2019-08-09 00:00:00 pdf
Part 15BAttestation Statements 2019-08-09 00:00:00 pdf
Block DiagramBlock Diagram N/A
Operational DescriptionOperational Description N/A
SchematicsSchematics N/A

Application Details:

EquipmentBorder router/Bridge
FRN0018821439
Grantee CodeXFF
Product Code-BRD10
Applicant BusinessMMB Research Inc.
Business Address25 Adelaide Street East, Suite 400 , Toronto,N/A Canada M5C3A1
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantMark Borins – CTO
Applicant Phone
Applicant Fax416-966-1571
Applicant Email[email protected]
Applicant MailStop
Test FirmUltraTech Engineering Labs Inc
Test Firm ContactTri Luu
Test Firm Phone
Test Firm Fax905-829-8050
Test Firm Email[email protected]
Certified ByDan Huynh – Authorized Agent
Comment [sSiuPb5XLgZNUbav/5LbJQ==]: Modular Approval. Power output listed is conducted. Power output reduction at upper band-edge channels is required for compliance as documented in this filing. This module is approved for mobile configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-users must be provided with instructions and operating conditions for satisfying RF Exposure compliance. This device has 20 and 40 bandwidth modes.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC