X8WBC840M

FCC ID

Equipment: Bluetooth 5.0 Module

Fanstel Corporation, Taipei BC840M

10F-10, No. 79, Sec. 1, Hsin Tai Wu Rd., Hsi-Chih,, New Taipei City, N/A 221 Taiwan

Application
Frequency Range
Final Action Date
Granted
NEDuxCJNhxpSATUr88465A==
2402.0-2480.0
2019-03-11
APPROVED
File NameDocument TypeDateDirect
Users ManualUsers Manual 2019-03-11 00:00:00 pdf
Test Setup PhotosTest Setup Photos 2019-03-11 00:00:00 pdf
Test ReportTest Report 2019-03-11 00:00:00 pdf
Modular Approval RequestCover Letter(s) 2019-03-11 00:00:00 pdf
confidentialityCover Letter(s) 2019-03-11 00:00:00 pdf
Declaration of authorizationCover Letter(s) 2019-03-11 00:00:00 pdf
Internal PhotosInternal Photos 2019-03-11 00:00:00 pdf
ID Label/Location InfoID Label/Location Info 2019-03-11 00:00:00 pdf
External PhotosExternal Photos 2019-03-11 00:00:00 pdf
RF Exposure InfoRF Exposure Info 2019-03-11 00:00:00 pdf
SchematicsSchematics N/A
Block DiagramBlock Diagram N/A
Operational DescriptionOperational Description N/A

Application Details:

EquipmentBluetooth 5.0 Module
FRN0019658053
Grantee CodeX8W
Product CodeBC840M
Applicant BusinessFanstel Corporation, Taipei
Business Address10F-10, No. 79, Sec. 1, Hsin Tai Wu Rd., Hsi-Chih, , New Taipei City,N/A Taiwan 221
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantPaudy Tung – Engineer
Applicant Phone
Applicant Fax886-2-26984813
Applicant Email[email protected]
Applicant MailStop
Test FirmInternational Standards Laboratory LT lab.
Test Firm ContactBert Chen
Test Firm Phone 352
Test Firm Fax886-3-4071738
Test Firm Email[email protected]
Certified ByPaudy Tung – Engineer
Comment [NEDuxCJNhxpSATUr88465A==]: Modular Approval. Power output listed is conducted. The device is mobile. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and "Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC