WUW-22135255

FCC ID

Equipment: 22132036 WIFI Module

Viavi Solutions Inc. -22135255

6001 America Center Drive, 6th Floor, San Jose, CA 95002 United States

Application
Frequency Range
Final Action Date
Granted
GPRT/K3q0zfmP6dDkBdp9Q==
5180.0-5240.0
2019-10-04
APPROVED
GPRT/K3q0zfmP6dDkBdp9Q==
5260.0-5320.0
2019-10-04
APPROVED
GPRT/K3q0zfmP6dDkBdp9Q==
5500.0-5700.0
2019-10-04
APPROVED
GPRT/K3q0zfmP6dDkBdp9Q==
5745.0-5825.0
2019-10-04
APPROVED
Y/Td3ONvL1SyOoCtOGLVrw==
2412.0-2462.0
2019-10-04
APPROVED
File NameDocument TypeDateDirect
Product LabelID Label/Location Info 2019-10-04 00:00:00 pdf
Internal PhotoInternal Photos 2019-10-04 00:00:00 pdf
External PhotoExternal Photos 2019-10-04 00:00:00 pdf
Change of ID Request LetterCover Letter(s) 2019-10-04 00:00:00 pdf
Project and Product Certification Representative Authorization LetterCover Letter(s) 2019-10-04 00:00:00 pdf
Change of ID Authorization LetterAttestation Statements 2019-10-04 00:00:00 pdf

Application Details:

Equipment22132036 WIFI Module
FRN0018231399
Grantee CodeWUW
Product Code-22135255
Applicant BusinessViavi Solutions Inc.
Business Address6001 America Center Drive, 6th Floor , San Jose,California United States 95002
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantBen Brooks – Compliance Manager
Applicant Phone
Applicant Fax0044-1256-739316
Applicant Email[email protected]
Applicant MailStop
Test FirmSGS Taiwan Ltd.
Test Firm ContactRyan Wang
Test Firm Phone 1708
Test Firm Fax+886-2-2298-2248
Test Firm Email[email protected]
Certified ByBen Brooks – Compliance Manager
Comment [GPRT/K3q0zfmP6dDkBdp9Q==]: Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Operations in 5150-5250 MHz band is for indoor use only. This device has a 20/40/80 MHz bandwidth mode. The 80 MHz mode is limited to channel at 5210MHz, 5290MHz, 5530MHz, 5610MHz, and 5775 MHz.
Comment [Y/Td3ONvL1SyOoCtOGLVrw==]: Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidths.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC