W6UNHA1900P-40W

FCC ID

Equipment: DAS

SOLiD, Inc. NHA1900P-40W

10,9th Floor, SOLiD Space, Pangyoyeok-ro 220, Bundang-gu,, Seongnam-si, Gyeonggi-do, N/A 463-400 South Korea

Application
Frequency Range
Final Action Date
Granted
nVvfCDj16uWmtsUHPQFoYg==
1930.0-1995.0
2020-05-21
APPROVED
File NameDocument TypeDateDirect
RF Test Report - 2 of 2Test Report 2020-05-21 00:00:00 pdf
RF Test Report - 1 of 2Test Report 2020-05-21 00:00:00 pdf
MPE Test ReportRF Exposure Info 2020-05-21 00:00:00 pdf
ID Label and Location InfoID Label/Location Info 2020-05-21 00:00:00 pdf
Attestation letter for Warning Label Message_Part 20Attestation Statements 2020-05-21 00:00:00 pdf
Confidentiality Request LetterCover Letter(s) 2020-05-21 00:00:00 pdf
Agent Authorization LetterCover Letter(s) 2020-05-21 00:00:00 pdf
Block DiagramBlock Diagram N/A
External PhotosExternal Photos 2020-11-15 00:00:00 N/A
Internal PhotosInternal Photos 2020-11-15 00:00:00 N/A
Operational DescriptionOperational Description N/A
Parts ListParts List/Tune Up Info N/A
Tune Up InfoParts List/Tune Up Info N/A
SchematicsSchematics N/A
Test Setup PhotosTest Setup Photos 2020-11-15 00:00:00 N/A
Users ManualUsers Manual 2020-11-15 00:00:00 N/A

Application Details:

EquipmentDAS
FRN0018550988
Grantee CodeW6U
Product CodeNHA1900P-40W
Applicant BusinessSOLiD, Inc.
Business Address10,9th Floor, SOLiD Space, Pangyoyeok-ro 220, Bundang-gu,, Seongnam-si, Gyeonggi-do,N/A South Korea 463-400
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
TCB Email[email protected]
ApplicantYong Chul Kim – Team Manager
Applicant Phone
Applicant Fax+82-31-627-6009
Applicant Email[email protected]
Applicant MailStop
Test FirmHCT Co., Ltd.
Test Firm ContactLee Yoon-Jung
Test Firm Phone
Test Firm Fax82-31-645-6401
Test Firm Email[email protected]
Certified ByYong-Chul Kim – Manager
Comment [nVvfCDj16uWmtsUHPQFoYg==]: Output power is conducted. Device supports GSM, CDMA, WCDMA, and LTE 5/10MHz modulation in the downlink path. This device is authorized to operate only as part of a distributed-antenna booster system. This application covers only the system configuration with host/master unit connected to a base station in the uplink path; operations if any with host/master unit connected to antenna or amplifier in the uplink require separate equipment authorization. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. The antenna(s) used for this transmitter must be fixed-mounted on outdoor/indoor permanent structures with a separation distance from all persons during normal operation as documented in this filing. The single unit RF Exposure compliance using a 16dBi antenna requires a minimum separation distance between persons and the antenna of 6 meters. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of Sec. 1.1307(b)(3), for satisfying RF exposure compliance. RF exposure will be addressed at time of installation and licensing, and the use of higher gain antennas may require larger separation distances.

© 2020 FCC.report
This site is not affiliated with or endorsed by the FCC