VPYLB1CQ

FCC ID

Equipment: Communication Module

Murata Manufacturing Co., Ltd. LB1CQ

10-1, Higashikotari 1-chome Nagaokakyo-shi, Kyoto, N/A 617-8555 Japan

Application
Frequency Range
Final Action Date
Granted
+rBQKVQuqFquZe1f7jr3sA==
5180.0-5240.0
2019-02-03
APPROVED
+rBQKVQuqFquZe1f7jr3sA==
5260.0-5320.0
2019-02-03
APPROVED
+rBQKVQuqFquZe1f7jr3sA==
5500.0-5720.0
2019-02-03
APPROVED
+rBQKVQuqFquZe1f7jr3sA==
5745.0-5825.0
2019-02-03
APPROVED
HLF5cTVPupHcL/1e5tvdXg==
2402.0-2480.0
2019-02-03
APPROVED
HLF5cTVPupHcL/1e5tvdXg==
2412.0-2462.0
2019-02-03
APPROVED
1uDyOdTtjKWeDiTcPciTkQ==
2402.0-2480.0
2019-02-03
APPROVED
File NameDocument TypeDateDirect
User manualUsers Manual 2019-07-31 00:00:00 pdf
FCC Short & Long Term Confidentiality Request Rev4.1Cover Letter(s) 2019-02-03 00:00:00 pdf
RLAN_Report_5Test Report 2019-02-03 00:00:00 pdf
RLAN_Report_4Test Report 2019-02-03 00:00:00 pdf
RLAN_Report_3Test Report 2019-02-03 00:00:00 pdf
RLAN_Report_2Test Report 2019-02-03 00:00:00 pdf
RLAN_Report_1Test Report 2019-02-03 00:00:00 pdf
FCC Software Configuration Control Declaration Rev1.1Cover Letter(s) 2019-02-03 00:00:00 pdf
Letter_for_Module_DeclarationCover Letter(s) 2019-02-03 00:00:00 pdf
Setup_PhotoTest Setup Photos 2019-07-31 00:00:00 pdf
label_and_label_locationID Label/Location Info 2019-02-03 00:00:00 pdf
Authorization_LetterCover Letter(s) 2019-02-03 00:00:00 pdf
Agent Authorization Rev 1.0Cover Letter(s) 2019-02-03 00:00:00 pdf
FCC MPE ReportRF Exposure Info 2019-02-03 00:00:00 pdf
FCC_Special_Power_of_AttorneyCover Letter(s) 2019-02-03 00:00:00 pdf
Internal_PhotoInternal Photos 2019-07-31 00:00:00 pdf
External_PhotoExternal Photos 2019-07-31 00:00:00 pdf
WLAN Report _5Test Report 2019-02-03 00:00:00 pdf
WLAN Report_ 4Test Report 2019-02-03 00:00:00 pdf
WLAN Report _3Test Report 2019-02-03 00:00:00 pdf
WLAN Report _2Test Report 2019-02-03 00:00:00 pdf
WLAN Report _1Test Report 2019-02-03 00:00:00 pdf
BLE_ReportTest Report 2019-02-03 00:00:00 pdf
BT_Report_2Test Report 2019-02-03 00:00:00 pdf
BT_Report_1Test Report 2019-02-03 00:00:00 pdf
schematicsSchematics N/A
Block_DiagramBlock Diagram N/A
user_manual_FCCUsers Manual 2019-07-31 00:00:00 N/A
operation_sedciptionOperational Description N/A
SOFTWARE_SECURITY_DESCRIPTIONSDR Software/Security Inf N/A

Application Details:

EquipmentCommunication Module
FRN0017033432
Grantee CodeVPY
Product CodeLB1CQ
Applicant BusinessMurata Manufacturing Co., Ltd.
Business Address10-1, Higashikotari 1-chome Nagaokakyo-shi, Kyoto,N/A Japan 617-8555
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantMOTOO HAYASHI – GENERAL MANAGER
Applicant Phone
Applicant Fax81-75-955-6634
Applicant Email[email protected]
Applicant MailStop
Test FirmUL Verification Services (Guangzhou) Co., Ltd.
Test Firm ContactStephen Guo
Test Firm Phone
Test Firm Fax
Test Firm Email[email protected]
Certified ByLEO LIU –
Comment [+rBQKVQuqFquZe1f7jr3sA==]: Limited Single Modular Approval Output power listed is maximum combined conducted power. Device is a 2x2 MIMO as is described in the filing. Device contains 20 and 40,80 MHz signal bandwidth. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warming as shown in User manual. This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be collocated or operating in conjunction with antenna or transmitter. If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID: VPYLB1CQ or Contains FCC ID: VPYLB1CQ when the module is installed inside another device.
Comment [1uDyOdTtjKWeDiTcPciTkQ==]: Limited Single Modular Approval Power listed is the maximum conducted output power. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
Comment [HLF5cTVPupHcL/1e5tvdXg==]: Limited Single Modular Approval Output power listed is maximum combined conducted power. Device is a 2x2 MIMO as is described in the filing. Device contains 20 and 40 MHz signal bandwidth. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module.The end user manual shall include all required regulatory information/warming as shown in User manual. This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be collocated or operating in conjunction with antenna or transmitter. If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID: VPYLB1CQ or Contains FCC ID: VPYLB1CQ when the module is installed inside another device.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC