Equipment: Remote Radio Unit supporting LTE and NB IoT

Ericsson AB AKRC161838-1

PDU Radio Torshamnsgatan 23, Stockholm, N/A 164 80 Sweden

Frequency Range
Final Action Date
File NameDocument TypeDateDirect
Test Setup PhotosTest Setup Photos 2019-11-07 00:00:00 pdf
Test Report 2Test Report 2019-11-07 00:00:00 pdf
Test Report 1Test Report 2019-11-07 00:00:00 pdf
Modular Approval LetterCover Letter(s) 2019-11-07 00:00:00 pdf
Cover LetterCover Letter(s) 2019-11-07 00:00:00 pdf
Confidentiality LetterCover Letter(s) 2019-11-07 00:00:00 pdf
Agents LetterCover Letter(s) 2019-11-07 00:00:00 pdf
Label and Label LocationID Label/Location Info 2019-11-07 00:00:00 pdf
External PhotosExternal Photos 2019-11-07 00:00:00 pdf
Block DiagramBlock Diagram N/A
Internal PhotosInternal Photos N/A
Operational Description IOperational Description N/A
Part ListParts List/Tune Up Info N/A
Operating Description IIParts List/Tune Up Info N/A
SchematicsSchematics N/A
UsermanualUsers Manual N/A
User Manual IUsers Manual N/A
User Manual IIUsers Manual N/A

Application Details:

EquipmentRemote Radio Unit supporting LTE and NB IoT
Grantee CodeTA8
Product CodeAKRC161838-1
Applicant BusinessEricsson AB
Business AddressPDU Radio Torshamnsgatan 23, Stockholm,N/A Sweden 164 80
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
TCB Email[email protected]
ApplicantIgor Tasevski – Head of PDU Radio
Applicant Phone
Applicant Fax+46 10 716 00 28
Applicant Email[email protected]
Applicant MailStop
Test FirmTUV SUD Product Service
Test Firm ContactMark Jenkins
Test Firm Phone
Test Firm Fax00-44-1489-558101
Test Firm Email[email protected]
Certified ByIgor Tasevski –
Comment [oWB0LpAOF/LZDbbVCXLtjQ==]: Limited Single Modular Approval. The power output listed is the manufacturers rated conducted power per antenna port. This transmitter must only be operated in the grantee's RBS systems. This transmitter supports single and multi-carrier operation in LTE and NB IoT mode. The antenna used for this transmitter must be installed to provide a separation distance of at least 50 cm from the General Public (uncontrolled exposure) or 20 cm from an Occupational Worker (controlled exposure). RF exposure compliance for these external antennas is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-locating requirements of 1.1307 (b)(3).

© 2020 FCC.report
This site is not affiliated with or endorsed by the FCC