SMQ9113EDAN

FCC ID

Equipment: Dual Band Combo Module

EDAN INSTRUMENTS, INC. 9113EDAN

#15 Jinhui Road, Jinsha Community, Kengzi Sub-District, Pingshan District, Shenzhen, N/A 518122 China

Application
Frequency Range
Final Action Date
Granted
V4FsZvzmYyywQRp9vBNs5g==
5180.0-5240.0
2020-05-19
APPROVED
V4FsZvzmYyywQRp9vBNs5g==
5260.0-5320.0
2020-05-19
APPROVED
V4FsZvzmYyywQRp9vBNs5g==
5500.0-5700.0
2020-05-19
APPROVED
V4FsZvzmYyywQRp9vBNs5g==
5745.0-5825.0
2020-05-19
APPROVED
zdENMHTpYNOSzRhCqWEaAw==
2412.0-2462.0
2020-05-19
APPROVED
File NameDocument TypeDateDirect
Label and Label LocationID Label/Location Info 2020-05-19 00:00:00 pdf
FCC_Short Long_Term_Confidentiality_RequestCover Letter(s) 2020-05-19 00:00:00 pdf
Authorization LetterCover Letter(s) 2020-05-19 00:00:00 pdf
Cover Letter for Modular Approval_rev1Cover Letter(s) 2020-05-19 00:00:00 pdf
Agent_AuthorizationCover Letter(s) 2020-05-19 00:00:00 pdf
NII test reportTest Report 2020-05-19 00:00:00 pdf
NII Test Data Part 3Test Report 2020-05-19 00:00:00 pdf
NII Test Data Part 2Test Report 2020-05-19 00:00:00 pdf
NII Test Data Part 1Test Report 2020-05-19 00:00:00 pdf
FCC Software Configuration Control DeclarationCover Letter(s) 2020-05-19 00:00:00 pdf
FCC exposure evluationRF Exposure Info 2020-05-19 00:00:00 pdf
BL-SZ19B0657-603 FCC DFS test reportTest Report 2020-05-19 00:00:00 pdf
Label_and_Label_LocationID Label/Location Info 2020-05-19 00:00:00 pdf
FCC_Short_&_Long_Term_ConfidentialityCover Letter(s) 2020-05-19 00:00:00 pdf
BL-SZ19B0657-601 DTS test report_WLANTest Report 2020-05-19 00:00:00 pdf
Block DiagramBlock Diagram N/A
Ext_PhotosExternal Photos 2020-11-16 00:00:00 N/A
INT_PHOTOInternal Photos 2020-11-16 00:00:00 N/A
Operational-DescriptionOperational Description N/A
SCHSchematics N/A
Test_Setup_PhotosTest Setup Photos 2020-11-16 00:00:00 N/A
User-ManualUsers Manual 2020-11-16 00:00:00 N/A
Block_DiagramBlock Diagram N/A
External_PhotosExternal Photos 2020-11-16 00:00:00 N/A
Internal_photosInternal Photos 2020-11-16 00:00:00 N/A
operation_descriptionOperational Description N/A
software security information informationSDR Software/Security Inf N/A
SchematicsSchematics N/A
User_manualUsers Manual 2020-11-16 00:00:00 N/A

Application Details:

EquipmentDual Band Combo Module
FRN0022565113
Grantee CodeSMQ
Product Code9113EDAN
Applicant BusinessEDAN INSTRUMENTS, INC.
Business Address#15 Jinhui Road, Jinsha Community, Kengzi Sub-District, Pingshan District, Shenzhen,N/A China 518122
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantHuanhuan Xia –
Applicant Phone
Applicant Fax0086 755 26882223
Applicant Email[email protected]
Applicant MailStop
Test FirmShenzhen BALUN Technology Co., Ltd.
Test Firm ContactHanson Lin
Test Firm Phone
Test Firm Fax
Test Firm Email[email protected]
Certified ByXUEWEN WU –
Comment [V4FsZvzmYyywQRp9vBNs5g==]: Output power listed is conducted power. Single Modular Approval The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.
Comment [zdENMHTpYNOSzRhCqWEaAw==]: Output power listed is conducted power. Single Modular Approval The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

© 2020 FCC.report
This site is not affiliated with or endorsed by the FCC