S7A-SP66

FCC ID

Equipment: ARK

SENA TECHNOLOGIES.Inc -SP66

19, Heolleung-ro 569-gil, Gangnam-gu, Seoul, N/A N/A South Korea

Application
Frequency Range
Final Action Date
Granted
QqWqb70uFzTp6NWXHCUe6A==
2402.0-2480.0
2019-04-12
APPROVED
YDE+K0QIg0G/CEYJhLUarg==
2402.0-2480.0
2019-04-12
APPROVED
File NameDocument TypeDateDirect
Test ReportTest Report 2019-04-12 00:00:00 pdf
RF Exporure InfoRF Exposure Info 2019-04-12 00:00:00 pdf
Label InfoID Label/Location Info 2019-04-12 00:00:00 pdf
Confidentiality Request LetterCover Letter(s) 2019-04-12 00:00:00 pdf
Attestation LetterCover Letter(s) 2019-04-12 00:00:00 pdf
POA LetterCover Letter(s) 2019-04-12 00:00:00 pdf
Part ListParts List/Tune Up Info N/A
SchematicsSchematics N/A
Users ManualUsers Manual 2019-10-09 00:00:00 N/A
Block DiagramBlock Diagram N/A
External PhotosExternal Photos 2019-10-09 00:00:00 N/A
Internal PhotosInternal Photos 2019-10-09 00:00:00 N/A
Test Setup PhotosTest Setup Photos 2019-10-09 00:00:00 N/A
Operational DescriptionOperational Description N/A

Application Details:

EquipmentARK
FRN0013268917
Grantee CodeS7A
Product Code-SP66
Applicant BusinessSENA TECHNOLOGIES.Inc
Business Address19, Heolleung-ro 569-gil, Gangnam-gu , Seoul,N/A South Korea
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantSeunghyun KIM – Research Engineer
Applicant Phone 131
Applicant Fax8225737710
Applicant Email[email protected]
Applicant MailStop
Test FirmICR Co., Ltd.
Test Firm ContactSim Sang-Woo
Test Firm Phone
Test Firm Fax+82-2-6351-9007
Test Firm Email[email protected]
Certified BySeunghyun Kim – Reasearch Engineer
Comment [QqWqb70uFzTp6NWXHCUe6A==]: Power listed is conducted. End-users must be provided with the specific installation instructions for satisfying RF exposure compliance. The antenna used for this transmitter must be installed to provide a minimum separation distance as specified in this filing, from persons during normal operation, which is 52.5 mm.
Comment [YDE+K0QIg0G/CEYJhLUarg==]: Power listed is conducted. End-users must be provided with the specific installation instructions for satisfying RF exposure compliance. The antenna used for this transmitter must be installed to provide a minimum separation distance as specified in this filing, from persons during normal operation, which is 52.5 mm.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC