RYK-WNFB263ACNIBT

FCC ID

Equipment: 802.11ac/a/b/g/n 2T2R Industrial Grade Wi-Fi / Bluetooth 4.1 Combo M.2 2230 Module

SparkLAN Communications, Inc. -WNFB263ACNIBT

8F., No.257, Sec. 2, Tiding Blvd., Neihu District,, Taipei, N/A N/A Taiwan

Application
Frequency Range
Final Action Date
Granted
KJks0JE82X9qmYmJQ1NCeA==
2402.0-2480.0
2018-11-16
APPROVED
KJks0JE82X9qmYmJQ1NCeA==
2412.0-2462.0
2018-11-16
APPROVED
cUj9pDUlras6BS1OmJ88pg==
5180.0-5240.0
2018-11-16
APPROVED
cUj9pDUlras6BS1OmJ88pg==
5260.0-5320.0
2018-11-16
APPROVED
cUj9pDUlras6BS1OmJ88pg==
5500.0-5700.0
2018-11-16
APPROVED
cUj9pDUlras6BS1OmJ88pg==
5745.0-5825.0
2018-11-16
APPROVED
uyi6U1vizG/YjpIL0rjUlA==
2402.0-2480.0
2018-11-16
APPROVED
File NameDocument TypeDateDirect
Attestation (Channel and Mode Declaration).pdfAttestation Statements 2018-11-16 00:00:00 pdf
Attestation (DFS Client Declaration) rev.pdfAttestation Statements 2018-11-16 00:00:00 pdf
Cover Letter (Agent Authorization).pdfCover Letter(s) 2018-11-16 00:00:00 pdf
Cover Letter-Confidentiality (long-term).pdfCover Letter(s) 2018-11-16 00:00:00 pdf
Modular Approval Request rev.pdfCover Letter(s) 2018-11-16 00:00:00 pdf
External Photos rev.pdfExternal Photos 2018-11-16 00:00:00 pdf
Label Sample & Label Location.pdfID Label/Location Info 2018-11-16 00:00:00 pdf
Internal Photos rev.pdfInternal Photos 2018-11-16 00:00:00 pdf
Test Report (BT EDR) rev.pdfTest Report 2018-11-16 00:00:00 pdf
Test Report (DFS) rev.pdfTest Report 2018-11-16 00:00:00 pdf
Test Report (DTS-BT LE) rev.pdfTest Report 2018-11-16 00:00:00 pdf
Test Report (DTS-WLAN) rev.pdfTest Report 2018-11-16 00:00:00 pdf
Test Report (NII) rev.pdfTest Report 2018-11-16 00:00:00 pdf
Test Set Up Photos rev.pdfTest Setup Photos 2018-11-16 00:00:00 pdf
Users Manual rev.pdfUsers Manual 2018-11-16 00:00:00 pdf
RF Exposure Info (MPE).pdfRF Exposure Info 2018-11-16 00:00:00 pdf

Application Details:

Equipment802.11ac/a/b/g/n 2T2R Industrial Grade Wi-Fi / Bluetooth 4.1 Combo M.2 2230 Module
FRN0010534840
Grantee CodeRYK
Product Code-WNFB263ACNIBT
Applicant BusinessSparkLAN Communications, Inc.
Business Address8F., No.257, Sec. 2, Tiding Blvd., Neihu District, , Taipei,N/A Taiwan
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantGrady Lin – Manager
Applicant Phone 400
Applicant Fax+886-2-2659-5538
Applicant Email[email protected]
Applicant MailStop
Test FirmBureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
Test Firm ContactKen Liu
Test Firm Phone 1609
Test Firm Fax+886-(0)3-211-5834
Test Firm Email[email protected]
Certified ByAndrea Hsia – Supervisor
Comment [cUj9pDUlras6BS1OmJ88pg==]: Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The device support 20, 40 and 80 MHz bandwidth. It is a 2x2 MIMO device.
Comment [KJks0JE82X9qmYmJQ1NCeA==]: Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The device support 20MHz bandwidth mode. It is a 2x2 MIMO
Comment [uyi6U1vizG/YjpIL0rjUlA==]: Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

© 2018 FCC.report
This site is not affiliated with or endorsed by the FCC