|Equipment||CBRS Cat. 12 module|
|Applicant Business||Billion Electric Co., Ltd.|
|Business Address||8F, No. 192, Sec. 2, Zhongxing Road, Xindian Dist. , New Taipei City,N/A Taiwan 231|
|TCB Scope||B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)|
|TCB Email||[email protected]|
|Applicant||Ted Ho – CTO |
|Applicant Phone|| |
|Applicant Email||[email protected]|
|Test Firm||Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch|
|Test Firm Contact||Eric Lin|
|Test Firm Phone|| |
|Test Firm Fax||+886-3-666-8323|
|Test Firm Email||[email protected]|
|Certified By||Andrea Hsia – Supervisor|
Comment [0wgO3EH1iK+irkebSU3LAw==]: Output power listed is EIRP. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
This device supports 5/10/15/20 MHz bandwidth modes for LTE B48 and uplink intra-band carrier aggregation for LTE B42.