|Equipment||WilsonPro 5G-specific cellular amplifier|
|Applicant Business||Wilson Electronics, LLC|
|Business Address||3301 E. Deseret Drive , St. George,Utah United States 84790|
|TCB Scope||B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27|
|TCB Email||[email protected]|
|Applicant||Patrick Lee Cook – Chief Technology |
|Applicant Phone|| 124|
|Applicant Email||[email protected]|
|Test Firm||Compliance Testing, LLC|
|Test Firm Contact||Michael Schafer|
|Test Firm Phone|| |
|Test Firm Fax||480 926 3598|
|Test Firm Email||[email protected]|
|Certified By||John Reynolds – TCB Manager|
Comment [/MEpb7dxr4reLmNzoQjqDA==]: In-Building DAS Industrial Booster. Power output listed is conducted. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements for satisfying RF exposure compliance. The antennas used for this transmitter is to be fixed-mounted onto indoor and outdoor structures. RF Exposure compliance for the device was based on maximum outdoor antenna gain 6.5 dBi, and maximum indoor antenna gain of 6.0 dBi, at separation distance of 20 cm. RF exposure compliance must be addressed at the time of licensing as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b) (3) of the rules.
This device supports LTE of 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Band 71. This device also supports Frequency Range 1 5G NR modes of 5, 10, 15, and 20 MHz bandwidth for FDD Band 71.