PGUWL1837

FCC ID

Equipment: WL1837MODGI

Welch Allyn, Inc. WL1837

9525 SW Gemini Road, Beaverton, OR 97008 United States

Application
Frequency Range
Final Action Date
Granted
OtOHeag2iM1XJln57/Xoqw==
5180.0-5240.0
2019-05-15
APPROVED
OtOHeag2iM1XJln57/Xoqw==
5190.0-5230.0
2019-05-15
APPROVED
OtOHeag2iM1XJln57/Xoqw==
5260.0-5320.0
2019-05-15
APPROVED
OtOHeag2iM1XJln57/Xoqw==
5270.0-5310.0
2019-05-15
APPROVED
OtOHeag2iM1XJln57/Xoqw==
5500.0-5700.0
2019-05-15
APPROVED
OtOHeag2iM1XJln57/Xoqw==
5745.0-5825.0
2019-05-15
APPROVED
IiOHIdHYeakyP31QrbYC7g==
2412.0-2462.0
2019-05-15
APPROVED
Rp/imdo4bBULOyCpgcVQ/Q==
5180.0-5240.0
2019-05-15
APPROVED
Rp/imdo4bBULOyCpgcVQ/Q==
5190.0-5230.0
2019-05-15
APPROVED
Rp/imdo4bBULOyCpgcVQ/Q==
5260.0-5320.0
2019-05-15
APPROVED
Rp/imdo4bBULOyCpgcVQ/Q==
5270.0-5310.0
2019-05-15
APPROVED
Rp/imdo4bBULOyCpgcVQ/Q==
5500.0-5700.0
2019-05-15
APPROVED
Rp/imdo4bBULOyCpgcVQ/Q==
5745.0-5825.0
2019-05-15
APPROVED
uc15VpneLTnZGBkIYnvSEg==
2402.0-2480.0
2019-05-15
APPROVED
uc15VpneLTnZGBkIYnvSEg==
2412.0-2462.0
2019-05-15
APPROVED
slms0oS9GxeYBMTNpyKXaQ==
2402.0-2480.0
2019-05-15
APPROVED
File NameDocument TypeDateDirect
RF ExposureRF Exposure Info 2019-05-15 00:00:00 pdf
Cover LetterCover Letter(s) 2019-05-15 00:00:00 pdf
Antenna InfoOperational Description 2019-05-15 00:00:00 pdf
ID labelID Label/Location Info 2019-05-15 00:00:00 pdf
Internal PhotosInternal Photos 2019-05-15 00:00:00 pdf
External PhotosExternal Photos 2019-05-15 00:00:00 pdf

Application Details:

EquipmentWL1837MODGI
FRN0003434628
Grantee CodePGU
Product CodeWL1837
Applicant BusinessWelch Allyn, Inc.
Business Address9525 SW Gemini Road , Beaverton,Oregon United States 97008
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantRobert Berry – Regulatory Affairs Manager
Applicant Phone 7935
Applicant Fax503-530-7436
Applicant Email[email protected]
Applicant MailStop
Test FirmElement Materials Technology
Test Firm ContactRenee Walker
Test Firm Phone
Test Firm Fax503-844-3826
Test Firm Email[email protected]
Certified ByRobert Berry – Regulatory Affairs Program Manager
Comment [IiOHIdHYeakyP31QrbYC7g==]: Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II permissive change as detailed in this filing: RF exposure compliance has been demonstrated for this transmitter at a 0 mm separation distance from the user’s torso when installed in Welch Allyn medical devices. The maximum duty cycle in a 30 minute period for this configuration is 6%. Other portable configurations not described in this filing must be separately authorized. Bluetooth operation, DTS and DSS Equipment Classes in the 2402 – 2480 MHz band, is not authorized in this configuration.
Comment [OtOHeag2iM1XJln57/Xoqw==]: Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II permissive change as detailed in this filing: RF exposure compliance has been demonstrated for this transmitter at a 0 mm separation distance from the user’s torso when installed in Welch Allyn medical devices. The maximum duty cycle in a 30 minute period for this configuration is 6%. Other portable configurations not described in this filing must be separately authorized. Bluetooth operation, DTS and DSS Equipment Classes in the 2402 – 2480 MHz band, is not authorized in this configuration.
Comment [Rp/imdo4bBULOyCpgcVQ/Q==]: Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode.
Comment [slms0oS9GxeYBMTNpyKXaQ==]: Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
Comment [uc15VpneLTnZGBkIYnvSEg==]: Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC