OG3-SCALA1

FCC ID

Equipment: Pressure increasing water pump communication module

Grundfos Holding A/S -SCALA1

Poul Due Jensens vej 7, Bjerringbro, N/A DK-8850 Denmark

Application
Frequency Range
Final Action Date
Granted
1ojukJfrULeehtYVPdB19g==
2402.0-2480.0
2019-11-27
APPROVED
File NameDocument TypeDateDirect
Test Set UpTest Setup Photos 2019-11-27 00:00:00 pdf
Integration GuideUsers Manual 2019-11-27 00:00:00 pdf
Test ReportTest Report 2019-11-27 00:00:00 pdf
MPE CalculationRF Exposure Info 2019-11-27 00:00:00 pdf
Label InfoID Label/Location Info 2019-11-27 00:00:00 pdf
Modular Approval LetterCover Letter(s) 2019-11-27 00:00:00 pdf
ST Confidentiality LetterCover Letter(s) 2019-11-27 00:00:00 pdf
Confidentiality RequestCover Letter(s) 2019-11-27 00:00:00 pdf
Authorisation LetterCover Letter(s) 2019-11-27 00:00:00 pdf
SchematicsSchematics N/A
Internal PhotosInternal Photos 2020-04-21 00:00:00 N/A
Operational DescriptionOperational Description N/A
Block DiagramBlock Diagram N/A
External PhotosExternal Photos 2020-04-21 00:00:00 N/A

Application Details:

EquipmentPressure increasing water pump communication module
FRN0021850581
Grantee CodeOG3
Product Code-SCALA1
Applicant BusinessGrundfos Holding A/S
Business AddressPoul Due Jensens vej 7 , Bjerringbro,N/A Denmark DK-8850
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantNikolaj Haahr Korshoej – Product Safety Specialist
Applicant Phone
Applicant Fax+4587501427
Applicant Email[email protected]
Applicant MailStop
Test FirmUL VS Ltd
Test Firm ContactDavid Chawira
Test Firm Phone
Test Firm Fax00-44-1256-312001
Test Firm Email[email protected]
Certified ByN Korshoj –
Comment [1ojukJfrULeehtYVPdB19g==]: Power is conducted. For satisfying FCC rule part 2.1091, RF exposure compliance; this device must be used at a distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC