NZLUAGTMC

FCC ID

Equipment: Integrated Toll Module

Gentex Corporation UAGTMC

600 N. Centennial, Zeeland, MI 49464 United States

Application
Frequency Range
Final Action Date
Granted
XoCb+1yc/tpeh5a+pmXLww==
915.0-915.0
2020-01-30
APPROVED
OXi+VuWRpGrZ6pEhCASk8g==
915.0-915.0
2020-01-30
APPROVED
File NameDocument TypeDateDirect
Confidentialty LetterCover Letter(s) 2020-01-30 00:00:00 pdf
Cover LetterCover Letter(s) 2020-01-30 00:00:00 pdf
External PhotosExternal Photos 2020-01-30 00:00:00 pdf
Internal PhotosInternal Photos 2020-01-30 00:00:00 pdf
Label InfoID Label/Location Info 2020-01-30 00:00:00 pdf
RF ExposureRF Exposure Info 2020-01-30 00:00:00 pdf
Part 90 Report Rev 2Test Report 2020-01-30 00:00:00 pdf
Test PhotosTest Setup Photos 2020-01-30 00:00:00 pdf
Users ManualUsers Manual 2020-01-30 00:00:00 pdf
Confidentialty Letter Rev 2.0Cover Letter(s) 2020-01-30 00:00:00 pdf
15 B Test Report Rev 3Test Report 2020-01-30 00:00:00 pdf
Test Photos Rev 2Test Setup Photos 2020-01-30 00:00:00 pdf
Block DiagramBlock Diagram N/A
Op Description Rev 3Operational Description N/A
Comments and ResponseOperational Description N/A
SchematicsSchematics N/A
Operational Description Rev 3Operational Description N/A
BOMParts List/Tune Up Info N/A
Tune Up Rev 2.0Parts List/Tune Up Info N/A

Application Details:

EquipmentIntegrated Toll Module
FRN0004266474
Grantee CodeNZL
Product CodeUAGTMC
Applicant BusinessGentex Corporation
Business Address600 N. Centennial , Zeeland,Michigan United States 49464
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
TCB Email[email protected]
ApplicantCraig Harder – EMC Lab Manager
Applicant Phone 5212
Applicant Fax616-748-8174
Applicant Email[email protected]
Applicant MailStop
Test FirmGentex Corporation
Test Firm ContactCraig Harder
Test Firm Phone 5212
Test Firm Fax6167727348
Test Firm Email[email protected]
Certified ByBrian Miller – EMC Regulatory Assistant
Comment [OXi+VuWRpGrZ6pEhCASk8g==]: Power output is ERP. Non-multilateration device exempt from frequency tolerance specifications per Section 90.213(a), Footnote 13. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB 447498 and therefore can be used in mobile configurations. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures and RF exposure compliance.

© 2020 FCC.report
This site is not affiliated with or endorsed by the FCC