E2KAX201D2

FCC ID

Equipment: Intel WiFi 6 AX201

Dell Inc. AX201D2

One Dell Way, Round Rock, TX 78682 United States

Application
Frequency Range
Final Action Date
Granted
w60gwTrko2gCXLPkRnb/4Q==
2402.0-2480.0
2019-07-24
APPROVED
owuzkg91xT+YsZyjwDQTcA==
2402.0-2480.0
2019-07-24
APPROVED
owuzkg91xT+YsZyjwDQTcA==
2412.0-2472.0
2019-07-24
APPROVED
owuzkg91xT+YsZyjwDQTcA==
2422.0-2462.0
2019-07-24
APPROVED
6klAdBVV1QM6gMCmIML2OQ==
5180.0-5240.0
2019-07-24
APPROVED
6klAdBVV1QM6gMCmIML2OQ==
5190.0-5230.0
2019-07-24
APPROVED
6klAdBVV1QM6gMCmIML2OQ==
5210.0-5210.0
2019-07-24
APPROVED
6klAdBVV1QM6gMCmIML2OQ==
5250.0-5250.0
2019-07-24
APPROVED
6klAdBVV1QM6gMCmIML2OQ==
5260.0-5320.0
2019-07-24
APPROVED
6klAdBVV1QM6gMCmIML2OQ==
5270.0-5310.0
2019-07-24
APPROVED
6klAdBVV1QM6gMCmIML2OQ==
5290.0-5290.0
2019-07-24
APPROVED
6klAdBVV1QM6gMCmIML2OQ==
5500.0-5700.0
2019-07-24
APPROVED
6klAdBVV1QM6gMCmIML2OQ==
5510.0-5670.0
2019-07-24
APPROVED
6klAdBVV1QM6gMCmIML2OQ==
5530.0-5690.0
2019-07-24
APPROVED
6klAdBVV1QM6gMCmIML2OQ==
5710.0-5710.0
2019-07-24
APPROVED
6klAdBVV1QM6gMCmIML2OQ==
5720.0-5720.0
2019-07-24
APPROVED
6klAdBVV1QM6gMCmIML2OQ==
5745.0-5825.0
2019-07-24
APPROVED
6klAdBVV1QM6gMCmIML2OQ==
5755.0-5795.0
2019-07-24
APPROVED
6klAdBVV1QM6gMCmIML2OQ==
5775.0-5775.0
2019-07-24
APPROVED
IQMMkPVTpzL0QX8LC9Q6NA==
5180.0-5240.0
2019-05-14
APPROVED
IQMMkPVTpzL0QX8LC9Q6NA==
5190.0-5230.0
2019-05-14
APPROVED
IQMMkPVTpzL0QX8LC9Q6NA==
5210.0-5210.0
2019-05-14
APPROVED
IQMMkPVTpzL0QX8LC9Q6NA==
5250.0-5250.0
2019-05-14
APPROVED
IQMMkPVTpzL0QX8LC9Q6NA==
5260.0-5320.0
2019-05-14
APPROVED
IQMMkPVTpzL0QX8LC9Q6NA==
5270.0-5310.0
2019-05-14
APPROVED
IQMMkPVTpzL0QX8LC9Q6NA==
5290.0-5290.0
2019-05-14
APPROVED
IQMMkPVTpzL0QX8LC9Q6NA==
5500.0-5700.0
2019-05-14
APPROVED
IQMMkPVTpzL0QX8LC9Q6NA==
5510.0-5670.0
2019-05-14
APPROVED
IQMMkPVTpzL0QX8LC9Q6NA==
5530.0-5690.0
2019-05-14
APPROVED
IQMMkPVTpzL0QX8LC9Q6NA==
5710.0-5710.0
2019-05-14
APPROVED
IQMMkPVTpzL0QX8LC9Q6NA==
5720.0-5720.0
2019-05-14
APPROVED
IQMMkPVTpzL0QX8LC9Q6NA==
5745.0-5825.0
2019-05-14
APPROVED
IQMMkPVTpzL0QX8LC9Q6NA==
5755.0-5795.0
2019-05-14
APPROVED
IQMMkPVTpzL0QX8LC9Q6NA==
5775.0-5775.0
2019-05-14
APPROVED
0H9AHCUKc3fB0VsHSERxQQ==
2402.0-2480.0
2019-05-14
APPROVED
0H9AHCUKc3fB0VsHSERxQQ==
2412.0-2472.0
2019-05-14
APPROVED
0H9AHCUKc3fB0VsHSERxQQ==
2422.0-2462.0
2019-05-14
APPROVED
s5Ach94MtqpKxVtK1PsKQg==
2402.0-2480.0
2019-05-14
APPROVED
qPXRK+HoKFpWRD5lhcT0xg==
-
2019-05-14
APPROVED
File NameDocument TypeDateDirect
SAR Report-4RF Exposure Info 2019-07-24 00:00:00 pdf
SAR Report-3RF Exposure Info 2019-07-24 00:00:00 pdf
SAR Report-2RF Exposure Info 2019-07-24 00:00:00 pdf
SAR Report-1RF Exposure Info 2019-07-24 00:00:00 pdf
ID Label and LocationID Label/Location Info 2019-07-24 00:00:00 pdf
Declaration LetterAttestation Statements 2019-07-24 00:00:00 pdf
Confidentiality Request LetterCover Letter(s) 2019-07-24 00:00:00 pdf
POACover Letter(s) 2019-07-24 00:00:00 pdf
C2PC Request LetterCover Letter(s) 2019-07-24 00:00:00 pdf
User Manual-2Users Manual 2019-07-24 00:00:00 pdf
User Manual-1Users Manual 2019-07-24 00:00:00 pdf
Test Setup Photos_SARTest Setup Photos 2019-07-24 00:00:00 pdf
POA from Original ID HolderCover Letter(s) 2019-05-14 00:00:00 pdf
Change ID Request LetterCover Letter(s) 2019-05-14 00:00:00 pdf
External PhotosExternal Photos 2019-11-11 00:00:00 N/A
Internal PhotosInternal Photos 2020-01-21 00:00:00 N/A
Operational DescriptionOperational Description N/A

Application Details:

EquipmentIntel WiFi 6 AX201
FRN0008359580
Grantee CodeE2K
Product CodeAX201D2
Applicant BusinessDell Inc.
Business AddressOne Dell Way , Round Rock,Texas United States 78682
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantRichard Worley – Regulatory Engineer
Applicant Phone
Applicant Fax512-283-9268
Applicant Email[email protected]
Applicant MailStopPS4-30
Test FirmIntel Corporation S.A.S.
Test Firm ContactNawfal ASRIH
Test Firm Phone
Test Firm Fax0033493001401
Test Firm Email[email protected]
Certified ByJoanna Hung – Specialist
Comment [0H9AHCUKc3fB0VsHSERxQQ==]: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
Comment [6klAdBVV1QM6gMCmIML2OQ==]: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of DELL Portable Computer, model: P103G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.19 W/kg and 1.31 W/kg, respectively.
Comment [IQMMkPVTpzL0QX8LC9Q6NA==]: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
Comment [owuzkg91xT+YsZyjwDQTcA==]: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of DELL Portable Computer, model: P103G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.98 W/kg and 1.16 W/kg, respectively.
Comment [s5Ach94MtqpKxVtK1PsKQg==]: Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
Comment [w60gwTrko2gCXLPkRnb/4Q==]: Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of DELL Portable Computer, model: P103G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.26 W/kg and 1.31 W/kg, respectively.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC