B94-AX201D2WRG

FCC ID

Equipment: Intel WiFi 6 AX201

HP Inc. -AX201D2WRG

3390 East Harmony Road, Fort Collins, CO 80528 United States

Application
Frequency Range
Final Action Date
Granted
6V9ncf0QWGODfQqQgdMp1Q==
2402.0-2480.0
2019-09-11
APPROVED
354vXXVB5PqHQYjxyFRYEA==
5180.0-5240.0
2019-09-11
APPROVED
354vXXVB5PqHQYjxyFRYEA==
5190.0-5230.0
2019-09-11
APPROVED
354vXXVB5PqHQYjxyFRYEA==
5210.0-5210.0
2019-09-11
APPROVED
354vXXVB5PqHQYjxyFRYEA==
5250.0-5250.0
2019-09-11
APPROVED
354vXXVB5PqHQYjxyFRYEA==
5260.0-5320.0
2019-09-11
APPROVED
354vXXVB5PqHQYjxyFRYEA==
5270.0-5310.0
2019-09-11
APPROVED
354vXXVB5PqHQYjxyFRYEA==
5290.0-5290.0
2019-09-11
APPROVED
354vXXVB5PqHQYjxyFRYEA==
5500.0-5700.0
2019-09-11
APPROVED
354vXXVB5PqHQYjxyFRYEA==
5510.0-5670.0
2019-09-11
APPROVED
354vXXVB5PqHQYjxyFRYEA==
5530.0-5690.0
2019-09-11
APPROVED
354vXXVB5PqHQYjxyFRYEA==
5710.0-5710.0
2019-09-11
APPROVED
354vXXVB5PqHQYjxyFRYEA==
5720.0-5720.0
2019-09-11
APPROVED
354vXXVB5PqHQYjxyFRYEA==
5745.0-5825.0
2019-09-11
APPROVED
354vXXVB5PqHQYjxyFRYEA==
5755.0-5795.0
2019-09-11
APPROVED
354vXXVB5PqHQYjxyFRYEA==
5775.0-5775.0
2019-09-11
APPROVED
SaYgJshPHNYBjzVTovh9PA==
2402.0-2480.0
2019-09-11
APPROVED
SaYgJshPHNYBjzVTovh9PA==
2412.0-2472.0
2019-09-11
APPROVED
SaYgJshPHNYBjzVTovh9PA==
2422.0-2462.0
2019-09-11
APPROVED
nFOqJ9+HjzUtXIZTKihgrg==
5180.0-5240.0
2019-07-10
APPROVED
nFOqJ9+HjzUtXIZTKihgrg==
5190.0-5230.0
2019-07-10
APPROVED
nFOqJ9+HjzUtXIZTKihgrg==
5210.0-5210.0
2019-07-10
APPROVED
nFOqJ9+HjzUtXIZTKihgrg==
5250.0-5250.0
2019-07-10
APPROVED
nFOqJ9+HjzUtXIZTKihgrg==
5260.0-5320.0
2019-07-10
APPROVED
nFOqJ9+HjzUtXIZTKihgrg==
5270.0-5310.0
2019-07-10
APPROVED
nFOqJ9+HjzUtXIZTKihgrg==
5290.0-5290.0
2019-07-10
APPROVED
nFOqJ9+HjzUtXIZTKihgrg==
5500.0-5700.0
2019-07-10
APPROVED
nFOqJ9+HjzUtXIZTKihgrg==
5510.0-5670.0
2019-07-10
APPROVED
nFOqJ9+HjzUtXIZTKihgrg==
5530.0-5690.0
2019-07-10
APPROVED
nFOqJ9+HjzUtXIZTKihgrg==
5710.0-5710.0
2019-07-10
APPROVED
nFOqJ9+HjzUtXIZTKihgrg==
5720.0-5720.0
2019-07-10
APPROVED
nFOqJ9+HjzUtXIZTKihgrg==
5745.0-5825.0
2019-07-10
APPROVED
nFOqJ9+HjzUtXIZTKihgrg==
5755.0-5795.0
2019-07-10
APPROVED
nFOqJ9+HjzUtXIZTKihgrg==
5775.0-5775.0
2019-07-10
APPROVED
tBrOHOoJV15nXYwGOOdRvg==
-
2019-07-10
APPROVED
N84lNqJbj91iC34/CpVIRQ==
2402.0-2480.0
2019-07-10
APPROVED
N84lNqJbj91iC34/CpVIRQ==
2412.0-2472.0
2019-07-10
APPROVED
N84lNqJbj91iC34/CpVIRQ==
2422.0-2462.0
2019-07-10
APPROVED
Li5KXaMYVyD/VthQB6U3ig==
2402.0-2480.0
2019-07-10
APPROVED
File NameDocument TypeDateDirect
KDB Inquiry_20190602Cover Letter(s) 2019-09-11 00:00:00 pdf
KDB Inquiry 872375_PAGCover Letter(s) 2019-09-11 00:00:00 pdf
Appendix C_Phantom Description Dipole Cal. CertificateRF Exposure Info 2019-09-11 00:00:00 pdf
Appendix B_DAE Probe Cal. CertificateRF Exposure Info 2019-09-11 00:00:00 pdf
SAR Test ReportRF Exposure Info 2019-09-11 00:00:00 pdf
ConfidentialityCover Letter(s) 2019-09-11 00:00:00 pdf
FCC delegation-RTP to Peter TevlinCover Letter(s) 2019-09-11 00:00:00 pdf
FCC CIIPC LetterCover Letter(s) 2019-09-11 00:00:00 pdf
FCC Agent Authorization LetterCover Letter(s) 2019-09-11 00:00:00 pdf
Label LocationID Label/Location Info 2019-09-11 00:00:00 pdf
FCC_agent_auth_letter_Change IDCover Letter(s) 2019-07-10 00:00:00 pdf
FCC ID Change RequestCover Letter(s) 2019-07-10 00:00:00 pdf
FCC Auth Ltr Change of IDCover Letter(s) 2019-07-10 00:00:00 pdf
ID Label/Location InfoID Label/Location Info 2019-07-10 00:00:00 pdf
FCC Auth Ltr Change of ID_HPCover Letter(s) 2019-07-10 00:00:00 pdf
agent_auth_letter_Change IDCover Letter(s) 2019-07-10 00:00:00 pdf
delegation-RTP to Peter TevlinCover Letter(s) 2019-07-10 00:00:00 pdf
Auth Ltr Change of IDCover Letter(s) 2019-07-10 00:00:00 pdf
External PhotoExternal Photos 2020-02-09 00:00:00 N/A
Internal PhotoInternal Photos 2020-02-09 00:00:00 N/A
SAR_Appendix A_PhotographsTest Setup Photos 2020-02-09 00:00:00 N/A
UG_Regulatory StatementsUsers Manual 2020-02-09 00:00:00 N/A
User GuideUsers Manual 2020-02-09 00:00:00 N/A
WLAN Antenna Agency Report_NB mode_INPAQOperational Description N/A
WLAN Antenna Agency Report_Tablet mode_INPAQOperational Description N/A
External PhotosExternal Photos 2020-01-02 00:00:00 N/A
Users ManualUsers Manual 2020-02-09 00:00:00 N/A

Application Details:

EquipmentIntel WiFi 6 AX201
FRN0025126541
Grantee CodeB94
Product Code-AX201D2WRG
Applicant BusinessHP Inc.
Business Address3390 East Harmony Road , Fort Collins,Colorado United States 80528
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantRichard P Tarsio – US Canada Technical Regulations
Applicant Phone
Applicant Fax000-000-0000
Applicant Email[email protected]
Applicant MailStopMS 66
Test FirmSGS Taiwan Ltd. Electronics & Communication Lab
Test Firm ContactWillis CHEN
Test Firm Phone 1475
Test Firm Fax+886-2-2299-2248
Test Firm Email[email protected]
Certified ByJim Chang – Technical Manager
Comment [354vXXVB5PqHQYjxyFRYEA==]: CIIPC: This Class II Permissive Change incorporates previously certified module into the host: Portable category Configuration, Brand: HP, Model: TPN-Q225. The changes also include change the same antenna type with lower antenna gains. The 2 new antenna are (Vendor: INPAQ, Part Number: DQ60PLBLB18 (WA-P-LBLB-02-080) (TX1) and DQ60PLBLB18 (WA-P-LBLB-02-080) (TX2)). The highest reported SAR values for Body and Simultaneous transmission are 1.16 W/kg and 1.35 W/kg respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
Comment [6V9ncf0QWGODfQqQgdMp1Q==]: CIIPC: This Class II Permissive Change incorporates previously certified module into the host: Portable category Configuration, Brand: HP, Model: TPN-Q225. The changes also include change the same antenna type with lower antenna gains. The 2 new antenna are (Vendor: INPAQ, Part Number: DQ60PLBLB18 (WA-P-LBLB-02-080) (TX1) and DQ60PLBLB18 (WA-P-LBLB-02-080) (TX2)). The highest reported SAR values for Body and Simultaneous transmission are 0.19 W/kg and 1.35 W/kg respectively. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
Comment [Li5KXaMYVyD/VthQB6U3ig==]: Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
Comment [N84lNqJbj91iC34/CpVIRQ==]: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
Comment [nFOqJ9+HjzUtXIZTKihgrg==]: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
Comment [SaYgJshPHNYBjzVTovh9PA==]: CIIPC: This Class II Permissive Change incorporates previously certified module into the host: Portable category Configuration, Brand: HP, Model: TPN-Q225. The changes also include change the same antenna type with lower antenna gains. The 2 new antenna are (Vendor: INPAQ, Part Number: DQ60PLBLB18 (WA-P-LBLB-02-080) (TX1) and DQ60PLBLB18 (WA-P-LBLB-02-080) (TX2)). The highest reported SAR values for Body and Simultaneous transmission are 0.92 W/kg and 1.11 W/kg respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC