B94-AX201D2WR

FCC ID

Equipment: Intel Wireless -AX201

HP Inc. -AX201D2WR

3390 East Harmony Road, Fort Collins, CO 80528 United States

Application
Frequency Range
Final Action Date
Granted
b6235K+MRlTaikPhGDsvOw==
5180.0-5240.0
2019-07-17
APPROVED
b6235K+MRlTaikPhGDsvOw==
5190.0-5230.0
2019-07-17
APPROVED
b6235K+MRlTaikPhGDsvOw==
5210.0-5210.0
2019-07-17
APPROVED
b6235K+MRlTaikPhGDsvOw==
5250.0-5250.0
2019-07-17
APPROVED
b6235K+MRlTaikPhGDsvOw==
5260.0-5320.0
2019-07-17
APPROVED
b6235K+MRlTaikPhGDsvOw==
5270.0-5310.0
2019-07-17
APPROVED
b6235K+MRlTaikPhGDsvOw==
5290.0-5290.0
2019-07-17
APPROVED
b6235K+MRlTaikPhGDsvOw==
5500.0-5700.0
2019-07-17
APPROVED
b6235K+MRlTaikPhGDsvOw==
5510.0-5670.0
2019-07-17
APPROVED
b6235K+MRlTaikPhGDsvOw==
5530.0-5690.0
2019-07-17
APPROVED
b6235K+MRlTaikPhGDsvOw==
5710.0-5710.0
2019-07-17
APPROVED
b6235K+MRlTaikPhGDsvOw==
5720.0-5720.0
2019-07-17
APPROVED
b6235K+MRlTaikPhGDsvOw==
5745.0-5825.0
2019-07-17
APPROVED
b6235K+MRlTaikPhGDsvOw==
5755.0-5795.0
2019-07-17
APPROVED
b6235K+MRlTaikPhGDsvOw==
5775.0-5775.0
2019-07-17
APPROVED
KJX5+EpqvPY29pab6CKJGw==
2402.0-2480.0
2019-07-17
APPROVED
KJX5+EpqvPY29pab6CKJGw==
2412.0-2472.0
2019-07-17
APPROVED
KJX5+EpqvPY29pab6CKJGw==
2422.0-2462.0
2019-07-17
APPROVED
GAzZ7LXwy0g0LXVMPdZmlw==
2402.0-2480.0
2019-07-17
APPROVED
RiyQ1n4UnyN2RfEdT30dQQ==
5180.0-5240.0
2019-07-10
APPROVED
RiyQ1n4UnyN2RfEdT30dQQ==
5190.0-5230.0
2019-07-10
APPROVED
RiyQ1n4UnyN2RfEdT30dQQ==
5210.0-5210.0
2019-07-10
APPROVED
RiyQ1n4UnyN2RfEdT30dQQ==
5250.0-5250.0
2019-07-10
APPROVED
RiyQ1n4UnyN2RfEdT30dQQ==
5260.0-5320.0
2019-07-10
APPROVED
RiyQ1n4UnyN2RfEdT30dQQ==
5270.0-5310.0
2019-07-10
APPROVED
RiyQ1n4UnyN2RfEdT30dQQ==
5290.0-5290.0
2019-07-10
APPROVED
RiyQ1n4UnyN2RfEdT30dQQ==
5500.0-5700.0
2019-07-10
APPROVED
RiyQ1n4UnyN2RfEdT30dQQ==
5510.0-5670.0
2019-07-10
APPROVED
RiyQ1n4UnyN2RfEdT30dQQ==
5530.0-5690.0
2019-07-10
APPROVED
RiyQ1n4UnyN2RfEdT30dQQ==
5710.0-5710.0
2019-07-10
APPROVED
RiyQ1n4UnyN2RfEdT30dQQ==
5720.0-5720.0
2019-07-10
APPROVED
RiyQ1n4UnyN2RfEdT30dQQ==
5745.0-5825.0
2019-07-10
APPROVED
RiyQ1n4UnyN2RfEdT30dQQ==
5755.0-5795.0
2019-07-10
APPROVED
RiyQ1n4UnyN2RfEdT30dQQ==
5775.0-5775.0
2019-07-10
APPROVED
o1fSL0mBE6FEo7bDy5i6Jw==
2402.0-2480.0
2019-07-10
APPROVED
o1fSL0mBE6FEo7bDy5i6Jw==
2412.0-2472.0
2019-07-10
APPROVED
o1fSL0mBE6FEo7bDy5i6Jw==
2422.0-2462.0
2019-07-10
APPROVED
xkdULpVzIFL1WbAcPPYlXg==
-
2019-07-10
APPROVED
LySKcE2pV7Yiwxu+QjF4Lg==
2402.0-2480.0
2019-07-10
APPROVED
File NameDocument TypeDateDirect
RF Exposure SAR ReportRF Exposure Info 2019-07-17 00:00:00 pdf
Label and LocationID Label/Location Info 2019-07-17 00:00:00 pdf
Passive Scan AtestationCover Letter(s) 2019-07-17 00:00:00 pdf
Software Security LetterCover Letter(s) 2019-07-17 00:00:00 pdf
Modular Approval LetterCover Letter(s) 2019-07-17 00:00:00 pdf
Permissive Change LetterCover Letter(s) 2019-07-17 00:00:00 pdf
Confidentiality LetterCover Letter(s) 2019-07-17 00:00:00 pdf
Authorization LetterCover Letter(s) 2019-07-17 00:00:00 pdf
SGS_FCC_agent_auth_letter_Change ID for FCC ID B94-AX201D2WRCover Letter(s) 2019-07-10 00:00:00 pdf
FCC Short-term ConfidentialityCover Letter(s) 2019-07-10 00:00:00 pdf
FCC ID Change RequestCover Letter(s) 2019-07-10 00:00:00 pdf
FCC delegation-RTP to Peter TevlinCover Letter(s) 2019-07-10 00:00:00 pdf
FCC Auth Ltr Change of ID_HP_B94-AX201D2WRCover Letter(s) 2019-07-10 00:00:00 pdf
ID Label/Location InfoID Label/Location Info 2019-07-10 00:00:00 pdf
User ManualUsers Manual 2020-01-13 00:00:00 N/A
Theory of OperationOperational Description N/A
Test Setup Photos SARTest Setup Photos 2020-01-13 00:00:00 N/A
User Manual RegulatoryUsers Manual 2020-01-13 00:00:00 N/A
Descritpion Antenna InpaqOperational Description N/A
Theory of Operation DescriptionOperational Description N/A
External photoExternal Photos 2020-01-02 00:00:00 N/A

Application Details:

EquipmentIntel Wireless -AX201
FRN0025126541
Grantee CodeB94
Product Code-AX201D2WR
Applicant BusinessHP Inc.
Business Address3390 East Harmony Road , Fort Collins,Colorado United States 80528
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantRichard P Tarsio – US Canada Technical Regulations
Applicant Phone
Applicant Fax000-000-0000
Applicant Email[email protected]
Applicant MailStopMS 66
Test FirmIntel Corporation S.A.S.
Test Firm ContactNawfal ASRIH
Test Firm Phone
Test Firm Fax0033493001401
Test Firm Email[email protected]
Certified ByJay Moulton –
Comment [b6235K+MRlTaikPhGDsvOw==]: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.83W/kg and 1.58W/kg respectively. This change is to request approval for portable category specific host notebook PC, HP model number - TPN-Q225, with antenna Inpaq part no WA-P-LBLB-02-080 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
Comment [GAzZ7LXwy0g0LXVMPdZmlw==]: Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.58W/kg respectively. This change is to request approval for portable category specific host notebook PC, HP model number - TPN-Q225, with antenna Inpaq part no WA-P-LBLB-02-080 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
Comment [KJX5+EpqvPY29pab6CKJGw==]: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.04W/kg and 1.58W/kg respectively. This change is to request approval for portable category specific host notebook PC, HP model number - TPN-Q225, with antenna Inpaq part no WA-P-LBLB-02-080 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
Comment [LySKcE2pV7Yiwxu+QjF4Lg==]: Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
Comment [o1fSL0mBE6FEo7bDy5i6Jw==]: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
Comment [RiyQ1n4UnyN2RfEdT30dQQ==]: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC