ACJ9TGWW18B

FCC ID

Equipment: Radio Module

Panasonic Corporation of North America 9TGWW18B

Two Riverfront Plaza, 9th Floor, Newark, NJ 07102-5490 United States

Application
Frequency Range
Final Action Date
Granted
M9pfWAJgsOQzLoK4aTXvrQ==
699.0-716.0
2019-12-02
APPROVED
M9pfWAJgsOQzLoK4aTXvrQ==
777.0-787.0
2019-12-02
APPROVED
M9pfWAJgsOQzLoK4aTXvrQ==
788.0-798.0
2019-12-02
APPROVED
M9pfWAJgsOQzLoK4aTXvrQ==
814.0-824.0
2019-12-02
APPROVED
M9pfWAJgsOQzLoK4aTXvrQ==
824.0-849.0
2019-12-02
APPROVED
M9pfWAJgsOQzLoK4aTXvrQ==
1710.0-1755.0
2019-12-02
APPROVED
M9pfWAJgsOQzLoK4aTXvrQ==
1710.0-1780.0
2019-12-02
APPROVED
M9pfWAJgsOQzLoK4aTXvrQ==
1850.0-1910.0
2019-12-02
APPROVED
M9pfWAJgsOQzLoK4aTXvrQ==
2305.0-2315.0
2019-12-02
APPROVED
M9pfWAJgsOQzLoK4aTXvrQ==
2496.0-2690.0
2019-12-02
APPROVED
M9pfWAJgsOQzLoK4aTXvrQ==
2500.0-2570.0
2019-12-02
APPROVED
File NameDocument TypeDateDirect
External PhotosExternal Photos 2019-12-02 00:00:00 pdf
LabelID Label/Location Info 2019-12-02 00:00:00 pdf
ID Change LetterCover Letter(s) 2019-12-02 00:00:00 pdf
Agent Authorization LetterCover Letter(s) 2019-12-02 00:00:00 pdf

Application Details:

EquipmentRadio Module
FRN0007403181
Grantee CodeACJ
Product Code9TGWW18B
Applicant BusinessPanasonic Corporation of North America
Business AddressTwo Riverfront Plaza, 9th Floor , Newark,New Jersey United States 07102-5490
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
TCB Email[email protected]
ApplicantBen Botros – Project Manager
Applicant Phone
Applicant Fax201-348-7760
Applicant Email[email protected]
Applicant MailStop
Test FirmHCT Co., Ltd.
Test Firm ContactLee Yoon-Jung
Test Firm Phone
Test Firm Fax82-31-645-6401
Test Firm Email[email protected]
Certified ByTakayuki Shimada –
Comment [M9pfWAJgsOQzLoK4aTXvrQ==]: Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application; and must not be co- located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22/24/27. The Grantee is responsible for providing the documentation required for modular use. This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2/4/66; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5/12; 1.4 MHz, 3 MHz, 5 MHz, 10 MHz and 15 MHz bandwidth modes for LTE Band 26; 5 MHz and 10 MHz bandwidth modes for LTE Bands 13/14/30; 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 7/41. This device also supports CA UL on the LTE Bands 7/41.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC