2AVNZ-07

FCC ID

Equipment: EL20001V0.7

UBUDU SAS -07

22 rue Tourlaque 75018, Paris, N/A N/A France

Application
Frequency Range
Final Action Date
Granted
AqY+mNosQ9Cfc0tXX59p4w==
2402.0-2480.0
2020-02-03
APPROVED
File NameDocument TypeDateDirect
User ManualUsers Manual 2020-02-03 00:00:00 pdf
Test setup photoTest Setup Photos 2020-02-03 00:00:00 pdf
Request Limited Modular Transmitter ApprovalCover Letter(s) 2020-02-03 00:00:00 pdf
label and label locationID Label/Location Info 2020-02-03 00:00:00 pdf
Test report-DTSTest Report 2020-02-03 00:00:00 pdf
RF exposure info-MPERF Exposure Info 2020-02-03 00:00:00 pdf
PoACover Letter(s) 2020-02-03 00:00:00 pdf
FCC Confidentiality request letterCover Letter(s) 2020-02-03 00:00:00 pdf
Internal PhotosInternal Photos 2020-02-03 00:00:00 pdf
External photosExternal Photos 2020-02-03 00:00:00 pdf
Block diagramBlock Diagram N/A
Operation DescriptionOperational Description N/A
Declaration concerning Antenna SpecificationOperational Description N/A
SchematicSchematics N/A

Application Details:

EquipmentEL20001V0.7
FRN0029147881
Grantee Code2AVNZ
Product Code-07
Applicant BusinessUBUDU SAS
Business Address22 rue Tourlaque 75018 , Paris,N/A France
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantMonika Slugocka – Manager
Applicant Phone
Applicant Fax68533881843
Applicant Email[email protected]
Applicant MailStop
Test FirmShenzhen Global Test Service Co., Ltd.
Test Firm ContactJunwen Liu
Test Firm Phone
Test Firm Fax
Test Firm Email[email protected]
Certified ByMonika Slugocka – Manager
Comment [AqY+mNosQ9Cfc0tXX59p4w==]: Limited Single Modular Approval. Output power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The maximum antenna gain is -0.65dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

© 2020 FCC.report
This site is not affiliated with or endorsed by the FCC