Equipment: Module

King Young Technology Co., Ltd. KYRM-0083

10F, No. 318, Sec.1, Neihu Rd., Neihu District, Taipei City, N/A 114 Taiwan

Frequency Range
Final Action Date
File NameDocument TypeDateDirect
Users ManualUsers Manual 2019-12-02 00:00:00 pdf
Test Setup PhotosTest Setup Photos 2019-12-02 00:00:00 pdf
Internal PhotosInternal Photos 2020-05-25 00:00:00 pdf
ID Label/Location InfoID Label/Location Info 2019-12-02 00:00:00 pdf
External PhotosExternal Photos 2019-12-02 00:00:00 pdf
Antenna Spec.Cover Letter(s) 2019-12-02 00:00:00 pdf
Test ReportTest Report 2019-12-02 00:00:00 pdf
MPE ReportRF Exposure Info 2019-12-02 00:00:00 pdf
FCC Request of non-disclosureCover Letter(s) 2019-12-02 00:00:00 pdf
FCC Modular Approval RequestCover Letter(s) 2019-12-02 00:00:00 pdf
FCC Declaration of AuthorizationCover Letter(s) 2019-12-02 00:00:00 pdf
Block DiagramBlock Diagram N/A
Operational DescriptionOperational Description N/A
SchematicsSchematics N/A

Application Details:

Grantee Code2AU5W
Product CodeKYRM-0083
Applicant BusinessKing Young Technology Co., Ltd.
Business Address10F, No. 318, Sec.1, Neihu Rd., Neihu District , Taipei City,N/A Taiwan 114
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantTa-Yang Cheng –
Applicant Phone
Applicant Fax+886 2-2659-8422
Applicant Email[email protected]
Applicant MailStop
Test FirmInternational Standards Laboratory LT lab.
Test Firm ContactBert Chen
Test Firm Phone 352
Test Firm Fax886-3-4071738
Test Firm Email[email protected]
Certified ByTa-Yang Cheng – Engineer
Comment [icbTPAHFa7mSTgONbVGIkQ==]: Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

© 2020 FCC.report
This site is not affiliated with or endorsed by the FCC