2AS4H-MOD01

FCC ID

Equipment: LoRA module

Subeca, Inc. -MOD01

4514 Cole Avenue Suite 600, Dallas, TX 75205 United States

Application
Frequency Range
Final Action Date
Granted
t23Vaef9KiOHIMJ0gtL0Mw==
902.3-914.9
2019-07-10
APPROVED
t23Vaef9KiOHIMJ0gtL0Mw==
903.0-914.2
2019-07-10
APPROVED
qFBUAotiOBJgjnSTxI5i9w==
902.3-914.9
2019-07-10
APPROVED
qFBUAotiOBJgjnSTxI5i9w==
903.0-914.2
2019-07-10
APPROVED
File NameDocument TypeDateDirect
RF Exposure InfoRF Exposure Info 2019-07-10 00:00:00 pdf
C2PC Test reportTest Report 2019-07-10 00:00:00 pdf
Internal PhotosInternal Photos 2019-07-10 00:00:00 pdf
External PhotosExternal Photos 2019-07-10 00:00:00 pdf
Host Label & LocationID Label/Location Info 2019-07-10 00:00:00 pdf
C2PC request letterCover Letter(s) 2019-07-10 00:00:00 pdf
Authorization letterCover Letter(s) 2019-07-10 00:00:00 pdf
ID Label/Location InfoID Label/Location Info 2019-07-10 00:00:00 pdf
Change of ID authorization letterCover Letter(s) 2019-07-10 00:00:00 pdf
Change of ID request letterCover Letter(s) 2019-07-10 00:00:00 pdf

Application Details:

EquipmentLoRA module
FRN0028413904
Grantee Code2AS4H
Product Code-MOD01
Applicant BusinessSubeca, Inc.
Business Address4514 Cole Avenue Suite 600, Dallas,Texas United States 75205
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantMatthew Froncillo – VP Engineering
Applicant Phone
Applicant Faxits 2019
Applicant Email[email protected]
Applicant MailStop
Test FirmVista Laboratories, Inc.
Test Firm ContactDavid Zhang
Test Firm Phone
Test Firm Fax
Test Firm Email[email protected]
Certified ByMatt Froncillo – VP Engineering
Comment [qFBUAotiOBJgjnSTxI5i9w==]: Output power listed is conducted. Single modular approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.04 dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125 kHz and 500 kHz bandwidth modes. 900 MHz Band operation includes DTS and Hybrid modes of operation.
Comment [t23Vaef9KiOHIMJ0gtL0Mw==]: CIIPC of adding new antenna and specific mobile configuration host described in this filing. Output power listed is conducted. Single modular approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.9 dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125 kHz and 500 kHz bandwidth modes. 900 MHz Band operation includes DTS and Hybrid modes of operation.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC