2ARG9-ELR100

FCC ID

Equipment: eLR100-UL-00

eWBM Co.,Ltd. -ELR100

1-405, 134-16 Jungni-cheon-ro, Icheon-si, Gyeonggi-do, N/A N/A South Korea

Application
Frequency Range
Final Action Date
Granted
VNtlqa8gjplOxSkjPVlHpg==
902.3-914.9
2020-03-25
APPROVED
RQQFSjfkuCkocOH7WIEAnQ==
903.0-914.2
2020-03-25
APPROVED
File NameDocument TypeDateDirect
Agent_Authorization_Rev_1.0Cover Letter(s) 2020-03-25 00:00:00 pdf
LabelID Label/Location Info 2020-03-25 00:00:00 pdf
MPE CalculationRF Exposure Info 2020-03-25 00:00:00 pdf
Modular Approval Request LetterCover Letter(s) 2020-03-25 00:00:00 pdf
FCC Long Term Confidentiality Request Rev4.1Cover Letter(s) 2020-03-25 00:00:00 pdf
RF Test Repport_125kHz_eLR100-UL-00Test Report 2020-03-25 00:00:00 pdf
RF Test Report_500 kHz_eLR100-UL-00Test Report 2020-03-25 00:00:00 pdf
block_diagramBlock Diagram N/A
External_PhotosExternal Photos 2020-09-21 00:00:00 N/A
Internal_photosiInternal Photos 2020-09-21 00:00:00 N/A
Operation_DescriptionOperational Description N/A
Parts listParts List/Tune Up Info N/A
SCHSchematics N/A
Test Setup PhotosTest Setup Photos 2020-09-21 00:00:00 N/A
User_manualUsers Manual 2020-09-21 00:00:00 N/A
Internal_photosInternal Photos 2020-09-21 00:00:00 N/A

Application Details:

EquipmenteLR100-UL-00
FRN0027916048
Grantee Code2ARG9
Product Code-ELR100
Applicant BusinesseWBM Co.,Ltd.
Business Address1-405, 134-16 Jungni-cheon-ro, Icheon-si , Gyeonggi-do,N/A South Korea
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantKyu Hyun Jung – Manager
Applicant Phone 82
Applicant Fax+82-2-558-7876
Applicant Email[email protected]
Applicant MailStop
Test FirmDT&C; Co., Ltd.
Test Firm ContactLee Su-jeong
Test Firm Phone
Test Firm Fax82-31-321-1664
Test Firm Email[email protected]
Certified ByHARVEY SUNG –
Comment [RQQFSjfkuCkocOH7WIEAnQ==]: Limited Modular Approval, Output power listed is conducted power. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.
Comment [VNtlqa8gjplOxSkjPVlHpg==]: Limited Modular Approval, Output power listed is conducted power. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

© 2020 FCC.report
This site is not affiliated with or endorsed by the FCC