2AR82-SKOW618U101

FCC ID

Equipment: IEEE 802.11a/b/g/n 2T2R USB Wi-Fi Module

Guangzhou Shikun Electronics Co., Ltd -SKOW618U101

NO.6 Liankun Road,Huangpu District,, Guangzhou, N/A 510700 China

Application
Frequency Range
Final Action Date
Granted
goV3VqtQQdbJiZ++Ws4Y3g==
5180.0-5240.0
2020-01-09
APPROVED
goV3VqtQQdbJiZ++Ws4Y3g==
5260.0-5320.0
2020-01-09
APPROVED
goV3VqtQQdbJiZ++Ws4Y3g==
5500.0-5720.0
2020-01-09
APPROVED
goV3VqtQQdbJiZ++Ws4Y3g==
5745.0-5825.0
2020-01-09
APPROVED
2ZQtDH+7rJqLD8niCFHc8g==
2412.0-2462.0
2020-01-09
APPROVED
File NameDocument TypeDateDirect
FCC_Short_&_Long_Term_Confidentiality_RequestCover Letter(s) 2020-01-09 00:00:00 pdf
FCC Modular Approval RequestCover Letter(s) 2020-01-09 00:00:00 pdf
FCC agent auth letterCover Letter(s) 2020-01-09 00:00:00 pdf
Agent Authorization Rev 1.0Cover Letter(s) 2020-01-09 00:00:00 pdf
FCC MPE ReportRF Exposure Info 2020-01-09 00:00:00 pdf
Label_and_Label_LocationID Label/Location Info 2020-01-09 00:00:00 pdf
FCC Software Configuration Control Declaration Rev1.1Cover Letter(s) 2020-01-09 00:00:00 pdf
FCC ID&ISED_ 5G WIFI ReportTest Report 2020-01-09 00:00:00 pdf
FCC_Long_Term_Only_Confidentiality_RequestCover Letter(s) 2020-01-09 00:00:00 pdf
Agent_AuthorizationCover Letter(s) 2020-01-09 00:00:00 pdf
FCC ID&ISED_ 2.4G WIFI ReportTest Report 2020-01-09 00:00:00 pdf
User_manualUsers Manual 2020-07-05 00:00:00 N/A
Block_DiagramBlock Diagram N/A
block_diagramBlock Diagram N/A
BOMParts List/Tune Up Info N/A
operation_descriptionOperational Description N/A
Internal PhotosInternal Photos 2020-07-05 00:00:00 N/A
External_PhotosExternal Photos 2020-07-05 00:00:00 N/A
SchematicSchematics N/A
FCC Software Security Requirements for UNII devices Rev 2.1SDR Software/Security Inf N/A
User-ManualUsers Manual 2020-07-05 00:00:00 N/A
Test_Setup_photosTest Setup Photos 2020-07-05 00:00:00 N/A
SCHSchematics N/A
Operational_DescriptionOperational Description N/A
Internal_PhotosInternal Photos 2020-07-05 00:00:00 N/A
Test Setup PhotosTest Setup Photos 2020-07-05 00:00:00 N/A

Application Details:

EquipmentIEEE 802.11a/b/g/n 2T2R USB Wi-Fi Module
FRN0028116184
Grantee Code2AR82
Product Code-SKOW618U101
Applicant BusinessGuangzhou Shikun Electronics Co., Ltd
Business AddressNO.6 Liankun Road,Huangpu District, , Guangzhou,N/A China 510700
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantBing Yi – Certification Manager
Applicant Phone
Applicant Fax+86-20-82075579
Applicant Email[email protected]
Applicant MailStop
Test FirmUL Verification Services (Guangzhou) Co., Ltd.
Test Firm ContactStephen Guo
Test Firm Phone
Test Firm Fax
Test Firm Email[email protected]
Certified ByShawn wen –
Comment [2ZQtDH+7rJqLD8niCFHc8g==]: Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.
Comment [goV3VqtQQdbJiZ++Ws4Y3g==]: Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

© 2020 FCC.report
This site is not affiliated with or endorsed by the FCC