2AR3JSIM7000A

FCC ID

Equipment: SIM7000A

Bright Box Europe SA SIM7000A

Voie du Chariot, 3, 1003, Lausanne,, Vaud, N/A N/A Switzerland

Application
Frequency Range
Final Action Date
Granted
VDmqEgZHjLYPxiJbrfyRKg==
699.7-715.3
2019-03-14
APPROVED
VDmqEgZHjLYPxiJbrfyRKg==
779.5-784.5
2019-03-14
APPROVED
VDmqEgZHjLYPxiJbrfyRKg==
1710.7-1754.3
2019-03-14
APPROVED
VDmqEgZHjLYPxiJbrfyRKg==
1850.2-1909.8
2019-03-14
APPROVED
File NameDocument TypeDateDirect
labelID Label/Location Info 2019-03-14 00:00:00 pdf
External_photoExternal Photos 2019-03-14 00:00:00 pdf
FCC_Change_in_ID_cover_letter_2_to_be_signed_by_new_applicantCover Letter(s) 2019-03-14 00:00:00 pdf

Application Details:

EquipmentSIM7000A
FRN0028071348
Grantee Code2AR3J
Product CodeSIM7000A
Applicant BusinessBright Box Europe SA
Business AddressVoie du Chariot, 3, 1003, Lausanne, , Vaud,N/A Switzerland
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
TCB Email[email protected]
ApplicantAlexey Andreev –
Applicant Phone
Applicant FaxN/A
Applicant Email[email protected]
Applicant MailStop
Test FirmEast China Institute of Telecommunications
Test Firm ContactZheng Zhongbin
Test Firm Phone
Test Firm Fax
Test Firm Email[email protected]
Certified ByMin Zhang – Project Manager
Comment [VDmqEgZHjLYPxiJbrfyRKg==]: Power out is conducted at the antenna terminal. ERP for part 27 is 23.51dBm and EIRP for part 24/27 is 22.42dBm/22.89dBm. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install the SIM7000A module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.57 dBi at Lower 700 MHz, 2.23 dBi at Upper 700 MHz, 3.36 dBi at 1700 MHz and 1.87 dBi at 1900 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 3W erp/ 1W eirp Part 27 and the 2W eirp Part 24 power limits. This device contains LTE functions that are not operational in U.S. Territories. This device has 1.4 MHz bandwidth modes(CAT-M1) for LTE Band 2,Band 4, Band 12 and Band 13. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC