2AQNM-SLM756

FCC ID

Equipment: Smart Module

Shanghai XiXun Electronic Co., Ltd. -SLM756

NO.302,Floor 3,Building31, Lane 1555 West Jinshajiang Road, JiaDing District, Shanghai, N/A N/A China

Application
Frequency Range
Final Action Date
Granted
LbNa99BYyrPdAkuXrz/p4w==
704.0-711.0
2020-06-30
APPROVED
LbNa99BYyrPdAkuXrz/p4w==
709.0-711.0
2020-06-30
APPROVED
LbNa99BYyrPdAkuXrz/p4w==
779.5-784.5
2020-06-30
APPROVED
LbNa99BYyrPdAkuXrz/p4w==
782.0-782.0
2020-06-30
APPROVED
LbNa99BYyrPdAkuXrz/p4w==
826.4-846.6
2020-06-30
APPROVED
LbNa99BYyrPdAkuXrz/p4w==
829.0-844.0
2020-06-30
APPROVED
LbNa99BYyrPdAkuXrz/p4w==
1712.4-1752.6
2020-06-30
APPROVED
LbNa99BYyrPdAkuXrz/p4w==
1717.5-1747.5
2020-06-30
APPROVED
LbNa99BYyrPdAkuXrz/p4w==
1720.0-1745.0
2020-06-30
APPROVED
LbNa99BYyrPdAkuXrz/p4w==
1852.4-1907.6
2020-06-30
APPROVED
LbNa99BYyrPdAkuXrz/p4w==
1857.5-1902.5
2020-06-30
APPROVED
LbNa99BYyrPdAkuXrz/p4w==
1860.0-1900.0
2020-06-30
APPROVED
LbNa99BYyrPdAkuXrz/p4w==
2510.0-2560.0
2020-06-30
APPROVED
ZwHmZZQtM/m/qpUfINc88A==
2402.0-2480.0
2020-06-29
APPROVED
ZwHmZZQtM/m/qpUfINc88A==
2412.0-2462.0
2020-06-29
APPROVED
vq4oL9n1GalJvfuKXTX0+w==
2402.0-2480.0
2020-06-29
APPROVED
File NameDocument TypeDateDirect
Label & LocationID Label/Location Info 2020-06-30 00:00:00 pdf
External PhotosExternal Photos 2020-06-30 00:00:00 pdf
FCC ID Authorization letterCover Letter(s) 2020-06-30 00:00:00 pdf
Change in ID Request LetterCover Letter(s) 2020-06-30 00:00:00 pdf
Authorization Letter from Original GranteeCover Letter(s) 2020-06-30 00:00:00 pdf

Application Details:

EquipmentSmart Module
FRN0027706951
Grantee Code2AQNM
Product Code-SLM756
Applicant BusinessShanghai XiXun Electronic Co., Ltd.
Business AddressNO.302,Floor 3,Building31, Lane 1555 West Jinshajiang Road, JiaDing District, Shanghai,N/A China
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
TCB Email[email protected]
ApplicantYali Xu – General Manager
Applicant Phone
Applicant Fax021-51875808-818
Applicant Email[email protected]
Applicant MailStop
Test FirmBay Area Compliance Laboratories Corp. (Kunshan)
Test Firm ContactMr. John Chan
Test Firm Phone
Test Firm Fax
Test Firm Email[email protected]
Certified ByYali Xu –
Comment [LbNa99BYyrPdAkuXrz/p4w==]: Modular Approval. Output power listed is conducted. LTE supports 1.4/3/5/10/15/20 MHz BW modes in Band 2 & Band 4, 1.4/3/5/10 MHz BW modes in Band 5 & Band 12, 5/10/15/20 MHz BW modes in Band 7, and 5/10MHz BW modes in Band 13 & Band 17. Antenna gain including cable loss must not exceed 10 dBi in Band 2, 7 dBi in Band 4, 10.35 dBi in Band 5, 10 dBi in Band 7, 8.67 dBi in Band 12/17 and 11.11 dBi in Band 13 for the purpose of satisfying the requirements of CFR 47 §2.1043 and §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations.
Comment [vq4oL9n1GalJvfuKXTX0+w==]: Modular approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM or OEM integrators. This transmitter use as a module in mobile-only RF exposure conditions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application.
Comment [ZwHmZZQtM/m/qpUfINc88A==]: Modular approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM or OEM integrators. This transmitter use as a module in mobile-only RF exposure conditions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. This device support 20 MHz and 40 MHz bandwidth mod

© 2020 FCC.report
This site is not affiliated with or endorsed by the FCC