2AQLFLCB

FCC ID

Equipment: 802.11ac outdoor CPE

Frontiir Pte (with Frontiir Co LTD, Myanmar) LCB

809 Yakima Drive, Fremont, CA 94539 United States

Application
Frequency Range
Final Action Date
Granted
+yDKpkJdO1ylpjtyez4gRw==
5180.0-5240.0
2020-02-05
APPROVED
+yDKpkJdO1ylpjtyez4gRw==
5745.0-5825.0
2020-02-05
APPROVED
File NameDocument TypeDateDirect
External PhotosExternal Photos 2020-02-05 00:00:00 pdf
Users ManualUsers Manual 2020-02-05 00:00:00 pdf
MPE ReportRF Exposure Info 2020-02-05 00:00:00 pdf
Test Setup PhotosTest Setup Photos 2020-02-05 00:00:00 pdf
ID Label/Location InfoID Label/Location Info 2020-02-05 00:00:00 pdf
Antenna SpecCover Letter(s) 2020-02-05 00:00:00 pdf
Test ReportTest Report 2020-02-05 00:00:00 pdf
Internal PhotosInternal Photos 2020-02-05 00:00:00 pdf
confidentialityCover Letter(s) 2020-02-05 00:00:00 pdf
Professional installation declaration letterCover Letter(s) 2020-02-05 00:00:00 pdf
Declaration of authorizationCover Letter(s) 2020-02-05 00:00:00 pdf
Block DiagramBlock Diagram N/A
Operational DescriptionOperational Description N/A
NII Software Security InfoOperational Description N/A
SchematicsSchematics N/A

Application Details:

Equipment802.11ac outdoor CPE
FRN0027686310
Grantee Code2AQLF
Product CodeLCB
Applicant BusinessFrontiir Pte (with Frontiir Co LTD, Myanmar)
Business Address809 Yakima Drive , Fremont,California United States 94539
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantAllen Miu –
Applicant Phone
Applicant Fax5109799639
Applicant Email[email protected]
Applicant MailStop
Test FirmCerpass technology corporation Test Laboratory
Test Firm ContactBen Wang
Test Firm Phone 1810
Test Firm Fax+886-3-3226881
Test Firm Email[email protected]
Certified ByDelia Feng – V. Supervisor
Comment [+yDKpkJdO1ylpjtyez4gRw==]: Power listed is maximum power conducted. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing, and this device is limited to fixed point to point operation. The antennas use for this device must be installed to provide a separation distance of at least 30cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes.

© 2020 FCC.report
This site is not affiliated with or endorsed by the FCC