2APYU-DKL1613

FCC ID

Equipment: 2.4G Module

SHENZHEN DA KAI INDUSTRIES LTD. -DKL1613

3/F.,BLK.4,LIANJIAN TECHNOLOGY INDUSTRIAL PARK, HUA RONG ROAD,LONGHUA DISTRICT,, SHENZHEN,GUANGDONG,, N/A N/A China

Application
Frequency Range
Final Action Date
Granted
/zZggv8SnBFdM0Hl77SRVg==
2402.0-2465.0
2020-01-10
APPROVED
File NameDocument TypeDateDirect
LabelID Label/Location Info 2020-01-10 00:00:00 pdf
GTS201912000310F01Test Report 2020-01-10 00:00:00 pdf
FCC_Short_&_Long_Term_ConfidentialityCover Letter(s) 2020-01-10 00:00:00 pdf
FCC Modular Approval RequestCover Letter(s) 2020-01-10 00:00:00 pdf
Agent_Authorization_Rev_1.0Cover Letter(s) 2020-01-10 00:00:00 pdf
MPERF Exposure Info 2020-01-10 00:00:00 pdf
EXT_PHOTOExternal Photos 2020-02-24 00:00:00 N/A
Block_DiagramBlock Diagram N/A
Operation_DescriptionOperational Description N/A
INT_PHOTOInternal Photos 2020-02-24 00:00:00 N/A
SCHSchematics N/A
User_manualUsers Manual 2020-02-24 00:00:00 N/A
Test_Setup_PhotosTest Setup Photos 2020-02-24 00:00:00 N/A

Application Details:

Equipment2.4G Module
FRN0027569425
Grantee Code2APYU
Product Code-DKL1613
Applicant BusinessSHENZHEN DA KAI INDUSTRIES LTD.
Business Address3/F.,BLK.4,LIANJIAN TECHNOLOGY INDUSTRIAL PARK, HUA RONG ROAD,LONGHUA DISTRICT,, SHENZHEN,GUANGDONG,,N/A China
TCB ScopeA2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
TCB Email[email protected]
ApplicantJohn Li – General Manager
Applicant Phone
Applicant Fax0755-88839818
Applicant Email[email protected]
Applicant MailStop
Test FirmGlobal United Technology Services Co. Ltd.
Test Firm ContactRobinson Lo
Test Firm Phone
Test Firm Fax
Test Firm Email[email protected]
Certified ByDAVID –
Comment [/zZggv8SnBFdM0Hl77SRVg==]: Limited Single Modular Approval. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

© 2020 FCC.report
This site is not affiliated with or endorsed by the FCC