2AP9FSRC301

FCC ID

Equipment: FirstWatch CPU

HMC Holdings, LLC SRC301

1605 OLD ROUTE 18 STE 4-36, Wampum, PA 16157 United States

Application
Frequency Range
Final Action Date
Granted
RTebZup+9UmBpVb+g0nmYQ==
2402.0-2480.0
2019-01-31
APPROVED
DSUysADPO6CBKkYQvVThoA==
2402.0-2480.0
2019-01-31
APPROVED
File NameDocument TypeDateDirect
MPE CalculationRF Exposure Info 2019-01-31 00:00:00 pdf
User ManualUsers Manual 2019-01-31 00:00:00 pdf
Label & LocationID Label/Location Info 2019-01-31 00:00:00 pdf
Internal PhotosInternal Photos 2019-01-31 00:00:00 pdf
External PhotosExternal Photos 2019-01-31 00:00:00 pdf
Test Setup PhotosTest Setup Photos 2019-01-31 00:00:00 pdf
DTS Test ReportTest Report 2019-01-31 00:00:00 pdf
Model Differences DeclarationCover Letter(s) 2019-01-31 00:00:00 pdf
Modular Approval LetterCover Letter(s) 2019-01-31 00:00:00 pdf
Confidentiality Request LetterCover Letter(s) 2019-01-31 00:00:00 pdf
Authorization LetterCover Letter(s) 2019-01-31 00:00:00 pdf
DXX Test ReportTest Report 2019-01-31 00:00:00 pdf
SchematicsSchematics N/A
Block DiagramBlock Diagram N/A
Operational DescriptionOperational Description N/A

Application Details:

EquipmentFirstWatch CPU
FRN0027639202
Grantee Code2AP9F
Product CodeSRC301
Applicant BusinessHMC Holdings, LLC
Business Address1605 OLD ROUTE 18 STE 4-36 , Wampum,Pennsylvania United States 16157
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantElise Moyer – Office Manager
Applicant Phone 121
Applicant Fax724-535-1080
Applicant Email[email protected]
Applicant MailStop
Test FirmShenzhen Accurate Technology Co., Ltd.
Test Firm ContactSean Liu
Test Firm Phone
Test Firm Fax
Test Firm Email[email protected]
Certified ByElise Moyer – Office Manager
Comment [DSUysADPO6CBKkYQvVThoA==]: Modular Approval. Power output listed is conducted output power. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Comment [RTebZup+9UmBpVb+g0nmYQ==]: Modular Approval. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC