2AP3PFT750

FCC ID

Equipment: In-cab advanced telematics tracker

Flex Industrial, Ltd. FT750

Level 3, Alexander House 35 Cybercity, Ebene, N/A N/A Mauritius

Application
Frequency Range
Final Action Date
Granted
1wg4JeozNbreKFygLswE7g==
2402.0-2480.0
2019-08-08
APPROVED
1wg4JeozNbreKFygLswE7g==
2412.0-2462.0
2019-08-08
APPROVED
File NameDocument TypeDateDirect
Test Report -BLETest Report 2019-08-08 00:00:00 pdf
Test Report -WIFITest Report 2019-08-08 00:00:00 pdf
RF Exposure InfoRF Exposure Info 2019-08-08 00:00:00 pdf
Label and Label LocationID Label/Location Info 2019-08-08 00:00:00 pdf
Confidentiality Request Letter -2Cover Letter(s) 2019-08-08 00:00:00 pdf
Confidentiality Request LetterCover Letter(s) 2019-08-08 00:00:00 pdf
Authorization LetterCover Letter(s) 2019-08-08 00:00:00 pdf
Block DiagramBlock Diagram N/A
Circuit diagramSchematics N/A
External PhotosExternal Photos 2020-02-04 00:00:00 N/A
Internal PhotosInternal Photos 2020-02-04 00:00:00 N/A
Operational DescriptionOperational Description N/A
Setup PhotosTest Setup Photos 2020-02-04 00:00:00 N/A
User ManualUsers Manual 2020-02-04 00:00:00 N/A

Application Details:

EquipmentIn-cab advanced telematics tracker
FRN0027593888
Grantee Code2AP3P
Product CodeFT750
Applicant BusinessFlex Industrial, Ltd.
Business AddressLevel 3, Alexander House 35 Cybercity, Ebene,N/A Mauritius
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantPayam Abrishami – Dir Product Management
Applicant Phone
Applicant Fax408 576 7000
Applicant Email[email protected]
Applicant MailStop
Test FirmUL Verification Services (Guangzhou) Co., Ltd.
Test Firm ContactStephen Guo
Test Firm Phone
Test Firm Fax
Test Firm Email[email protected]
Certified ByPayam Abrishami – Director of Product Management
Comment [1wg4JeozNbreKFygLswE7g==]: Listed output power is peak conducted. This device supports 802.11b, 802.11g and 802.11n with 20MHz Bandwidth. This device also supports BLE. This transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Antennas used with this device must be of the same type with gains equal to or lower than described in this filing.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC