|Equipment||3G Smart Phone|
|Applicant Business||Epik One America Corporation|
|Business Address||801 Brickell Ave. #900 , Miami,Florida United States 33131|
|TCB Scope||A4: UNII devices & low power transmitters using spread spectrum techniques|
|TCB Email||[email protected]|
|Applicant||Tracy Hu – |
|Applicant Phone|| |
|Applicant Email||[email protected]|
|Test Firm||Bay Area Compliance Laboratories Corp. (Shenzhen)|
|Test Firm Contact||Well Wang|
|Test Firm Phone|| |
|Test Firm Fax|
|Test Firm Email||[email protected]|
|Certified By||Tracy Hu – |
Comment [DO+69wQiImhtDNpAFfdWQA==]: Output power listed is peak conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures.
Comment [DWksY99Xfn+9XmgZf/VPLg==]: Output power listed is conducted.
Comment [ynCKZDEVj7jfmnaxnNsJ4A==]: Output power listed is ERP for operation below 1 GHz and EIRP for operation above 1 GHz. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 10mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific, and simultaneous transmission exposure conditions are 0.66 W/kg, 0.93 W/kg, 1.48 W/kg, and 1.48 W/kg, respectively.
This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations.