2ANMB-ZENBDM90

FCC ID

Equipment: Bluetooth Module

Shanghai Yancan Electronic Technology Co., Ltd. -ZENBDM90

Room 2108-2109, Building No. 2, No.103 Caobao Road, Shanghai, N/A 200233 China

Application
Frequency Range
Final Action Date
Granted
zeAfcsfuN9wiulUlmlYtkw==
2402.0-2480.0
2020-06-24
APPROVED
AJL1X8crOfISBusNN7zwow==
2402.0-2480.0
2020-06-24
APPROVED
File NameDocument TypeDateDirect
User ManualUsers Manual 2020-06-24 00:00:00 pdf
Test Setup PhotosTest Setup Photos 2020-06-24 00:00:00 pdf
Test ReportTest Report 2020-06-24 00:00:00 pdf
RF ExposureRF Exposure Info 2020-06-24 00:00:00 pdf
Internal PhotosInternal Photos 2020-06-24 00:00:00 pdf
ID Label and Label LocationID Label/Location Info 2020-06-24 00:00:00 pdf
External PhotosExternal Photos 2020-06-24 00:00:00 pdf
Module Approval Request LetterCover Letter(s) 2020-06-24 00:00:00 pdf
FCC Long Term Confidential Authorization FormCover Letter(s) 2020-06-24 00:00:00 pdf
FCC ID Authorization letterCover Letter(s) 2020-06-24 00:00:00 pdf
Module Approval LetterCover Letter(s) 2020-06-24 00:00:00 pdf
Block DiagramBlock Diagram N/A
Opreation descriptionOperational Description N/A
SchematicsSchematics N/A

Application Details:

EquipmentBluetooth Module
FRN0026807321
Grantee Code2ANMB
Product Code-ZENBDM90
Applicant BusinessShanghai Yancan Electronic Technology Co., Ltd.
Business AddressRoom 2108-2109, Building No. 2, No.103 Caobao Road, Shanghai,N/A China 200233
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantSteven Jiang – Technical Manager
Applicant Phone
Applicant Fax(86) 21-64822186
Applicant Email[email protected]
Applicant MailStop
Test FirmBay Area Compliance Laboratories Corp. (Kunshan)
Test Firm ContactMr. John Chan
Test Firm Phone
Test Firm Fax
Test Firm Email[email protected]
Certified BySteven Jiang –
Comment [AJL1X8crOfISBusNN7zwow==]: Modular Approval. Output power listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee.
Comment [zeAfcsfuN9wiulUlmlYtkw==]: Modular Approval. Output power listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee.

© 2020 FCC.report
This site is not affiliated with or endorsed by the FCC