|Applicant Business||Radiocontrolli SRL|
|Business Address||Via Carditello 10 P.co Nuovo Villaggio 6 , San Tammaro -CE,N/A Italy 81050|
|TCB Scope||A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices|
|TCB Email||[email protected]|
|Applicant||Antonio Di Paola – CEO |
|Applicant Phone|| |
|Applicant Email||[email protected]|
|Test Firm||Bay Area Compliance Laboratories Corp.(Dongguan)|
|Test Firm Contact||David Zhang|
|Test Firm Phone|| |
|Test Firm Fax|
|Test Firm Email||[email protected]|
|Certified By||Antonio Di Paola – |
Comment [/UQQVOXEz+v/iD7ZEB6zrA==]: Modular Approval for mobile RF exposure condition. This grant is valid only when the module is sold to OEM or OEM integrator. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee and may require the submission of a Class II permissive change or new application.
Comment [QHMMZcDnLTG9qK5zkcBpdQ==]: Modular Approval. Power output listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee.