|Applicant Business||GCT SEMICONDUCTOR, INC|
|Business Address||10F Construction Financial Building 15, Boramae-ro 5-gil, Dongjak-gu,, Seoul,N/A South Korea 07071|
|TCB Scope||B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27|
|TCB Email||[email protected]|
|Applicant||Helen Lee – Sr. CAE Manager |
|Applicant Phone|| |
|Applicant Email||[email protected]|
|Test Firm||International Certification Corp.|
|Test Firm Contact||Fu-Cheng Chuang|
|Test Firm Phone|| 8620|
|Test Firm Fax||886-3-318-0155|
|Test Firm Email||[email protected]|
|Certified By||Gary Chang – Manager|
Comment [hXzuX3I5VZJeSCDMtACrvQ==]: Single Modular Approval. Power listed is maximum conducted output power. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 5.5dBi in 1.7GHz, and 11.16dBi in 700MHz. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.
This device supports LTE of 1.4, 3, 5, 10, 15, and 20MHz bandwidth modes for FDD LTE Bands 4; LTE of 5, and 10MHz bandwidth modes for FDD LTE Bands 13.