2AL6KBL-M8822CS1

FCC ID

Equipment: IEEE 802.11a/b/g/n/ac 2T2R WiFi + Bluetooth SDIO Module

ShenZhen BiLian Electronic Co.,Ltd. BL-M8822CS1

Room 501,Building 3,No.32,Dafu Road, Zhangge Community,FuchengStreet,Longhua District,, Shenzhen, N/A 518000 China

Application
Frequency Range
Final Action Date
Granted
1Apk4n3KxIQIeGFiU075Tg==
2402.0-2480.0
2020-05-20
APPROVED
1Apk4n3KxIQIeGFiU075Tg==
2412.0-2462.0
2020-05-20
APPROVED
1Apk4n3KxIQIeGFiU075Tg==
2422.0-2452.0
2020-05-20
APPROVED
fJg2BZ32WdLw7X4ubdfZGg==
5180.0-5240.0
2020-05-20
APPROVED
fJg2BZ32WdLw7X4ubdfZGg==
5190.0-5230.0
2020-05-20
APPROVED
fJg2BZ32WdLw7X4ubdfZGg==
5210.0-5210.0
2020-05-20
APPROVED
fJg2BZ32WdLw7X4ubdfZGg==
5745.0-5825.0
2020-05-20
APPROVED
fJg2BZ32WdLw7X4ubdfZGg==
5755.0-5795.0
2020-05-20
APPROVED
fJg2BZ32WdLw7X4ubdfZGg==
5775.0-5775.0
2020-05-20
APPROVED
DSZh/OS8zeiXx4esWyqn3Q==
2402.0-2480.0
2020-05-20
APPROVED
File NameDocument TypeDateDirect
LabelID Label/Location Info 2020-05-20 00:00:00 pdf
Internal photosInternal Photos 2020-05-20 00:00:00 pdf
RF Exposure- MPERF Exposure Info 2020-05-20 00:00:00 pdf
Test Report-DTS 2.4G WIFI part 2Test Report 2020-05-20 00:00:00 pdf
Test Report-DTS 2.4G WIFI part 1Test Report 2020-05-20 00:00:00 pdf
Test Report-DTS BLETest Report 2020-05-20 00:00:00 pdf
FCC POACover Letter(s) 2020-05-20 00:00:00 pdf
FCC Declaration of Disable WLAN Channel 12 and 13Cover Letter(s) 2020-05-20 00:00:00 pdf
FCC Confidentiality request lettersCover Letter(s) 2020-05-20 00:00:00 pdf
External photosExternal Photos 2020-05-20 00:00:00 pdf
Test Report-NII part 5Test Report 2020-05-20 00:00:00 pdf
Test Report-NII part 4Test Report 2020-05-20 00:00:00 pdf
Test Report-NII part 3Test Report 2020-05-20 00:00:00 pdf
Test Report-NII part 2Test Report 2020-05-20 00:00:00 pdf
Test Report-NII part 1Test Report 2020-05-20 00:00:00 pdf
User ManualUsers Manual 2020-05-20 00:00:00 pdf
Test Setup PhotosTest Setup Photos 2020-05-20 00:00:00 pdf
Request Modular Transmitter ApprovalCover Letter(s) 2020-05-20 00:00:00 pdf
FCC UNII Device Declaration LetterCover Letter(s) 2020-05-20 00:00:00 pdf
Test Report-DSSTest Report 2020-05-20 00:00:00 pdf
Block DiagramBlock Diagram N/A
Operation DescriptionOperational Description N/A
Declaration concerning Antenna SpecificationOperational Description N/A
SchematicSchematics N/A
Declaration Letter of Software Security RequirementsOperational Description N/A

Application Details:

EquipmentIEEE 802.11a/b/g/n/ac 2T2R WiFi + Bluetooth SDIO Module
FRN0026535013
Grantee Code2AL6K
Product CodeBL-M8822CS1
Applicant BusinessShenZhen BiLian Electronic Co.,Ltd.
Business AddressRoom 501,Building 3,No.32,Dafu Road, Zhangge Community,FuchengStreet,Longhua District,, Shenzhen,N/A China 518000
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantHanbing Deng – manager
Applicant Phone
Applicant Fax0755-24665666
Applicant Email[email protected]
Applicant MailStop
Test FirmShenzhen Global Test Service Co., Ltd.
Test Firm ContactJunwen Liu
Test Firm Phone
Test Firm Fax
Test Firm Email[email protected]
Certified ByHanbing Deng – Manager
Comment [1Apk4n3KxIQIeGFiU075Tg==]: Single Modular Approval. Output power listed is peak conducted. This device supports 2*2 MIMO and supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The maximum antenna gain is 2.0dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.
Comment [DSZh/OS8zeiXx4esWyqn3Q==]: Single Modular Approval. Output power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The maximum antenna gain is 2.0dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.
Comment [fJg2BZ32WdLw7X4ubdfZGg==]: Single Modular Approval. Output power listed is average conducted. This device supports 2*2 MIMO and supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The maximum antenna gain is 2.0dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

© 2020 FCC.report
This site is not affiliated with or endorsed by the FCC