2AJAS2019M2

FCC ID

Equipment: WiGig M2 Module

Millitronic 2019M2

7F.-6, No.237, Sec.1, Datong Rd., Xizhi Dist., New Taipei City, N/A N/A Taiwan

Application
Frequency Range
Final Action Date
Granted
4av5hgQvH9OuYvokrjrE9w==
58320.0-62640.0
2019-01-31
APPROVED
File NameDocument TypeDateDirect
Professional Installation DeclarationCover Letter(s) 2019-01-31 00:00:00 pdf
POACover Letter(s) 2019-01-31 00:00:00 pdf
Modular Approval LetterCover Letter(s) 2019-01-31 00:00:00 pdf
Label InfoID Label/Location Info 2019-01-31 00:00:00 pdf
Test ReportTest Report 2019-01-31 00:00:00 pdf
MPE ReportRF Exposure Info 2019-01-31 00:00:00 pdf
Confidentiality LetterCover Letter(s) 2019-01-31 00:00:00 pdf
SchematicsSchematics N/A
User ManualUsers Manual 2019-07-30 00:00:00 N/A
Block DiagramBlock Diagram N/A
External PhotosExternal Photos 2019-07-30 00:00:00 N/A
Internal PhotosInternal Photos 2019-07-30 00:00:00 N/A
Test Setup PhotosTest Setup Photos 2019-07-30 00:00:00 N/A
Operational DescriptionOperational Description N/A

Application Details:

EquipmentWiGig M2 Module
FRN0025774571
Grantee Code2AJAS
Product Code2019M2
Applicant BusinessMillitronic
Business Address7F.-6, No.237, Sec.1, Datong Rd., Xizhi Dist. , New Taipei City,N/A Taiwan
TCB ScopeA2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
TCB Email[email protected]
ApplicantSam Yu –
Applicant Phone 188
Applicant Fax+886-2-2648-6697
Applicant Email[email protected]
Applicant MailStop
Test FirmSporton International Inc.
Test Firm ContactAlex CHEN
Test Firm Phone
Test Firm Fax+886-3-327-0978
Test Firm Email[email protected]
Certified ByLeo Huang – Manager
Comment [4av5hgQvH9OuYvokrjrE9w==]: Single Modular Approval. Professional or OEM installation required. Power listed is conducted. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC