2AI2V-ISBLE1810X52L

FCC ID

Equipment: Bluetooth Low Energy module

iSenseTek Technology Inc. -ISBLE1810X52L

4F-1, No.15, Ln. 360, Sec. 1,Neihu Rd., Neihu Dist., Taipei, N/A N/A Taiwan

Application
Frequency Range
Final Action Date
Granted
i53gS71e43qJIA2z51OqPQ==
2402.0-2480.0
2019-10-08
APPROVED
File NameDocument TypeDateDirect
ID Label/Location Info_revised1008ID Label/Location Info 2019-10-08 00:00:00 pdf
MPERF Exposure Info 2019-10-08 00:00:00 pdf
Test ReportTest Report 2019-10-08 00:00:00 pdf
FCC Modular Approval RequestCover Letter(s) 2019-10-08 00:00:00 pdf
ConfidentialityCover Letter(s) 2019-10-08 00:00:00 pdf
Declaration of Conformity FCC subpart 15BCover Letter(s) 2019-10-08 00:00:00 pdf
Declaration of authorizationCover Letter(s) 2019-10-08 00:00:00 pdf
Users ManualUsers Manual 2019-10-08 00:00:00 pdf
Test Setup PhotosTest Setup Photos 2019-10-08 00:00:00 pdf
Internal PhotosInternal Photos 2019-10-08 00:00:00 pdf
External PhotosExternal Photos 2019-10-08 00:00:00 pdf
Block DiagramBlock Diagram N/A
ID Label/Location InfoID Label/Location Info 2019-10-08 00:00:00 N/A
Operational DescriptionOperational Description N/A
SchematicsSchematics N/A

Application Details:

EquipmentBluetooth Low Energy module
FRN0025716853
Grantee Code2AI2V
Product Code-ISBLE1810X52L
Applicant BusinessiSenseTek Technology Inc.
Business Address4F-1, No.15, Ln. 360, Sec. 1,Neihu Rd., Neihu Dist., Taipei,N/A Taiwan
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantBrian Chiang – Director
Applicant Phone
Applicant Fax+886-2-27993757
Applicant Email[email protected]
Applicant MailStop
Test FirmInternational Standards Laboratory LT lab.
Test Firm ContactBert Chen
Test Firm Phone 352
Test Firm Fax886-3-4071738
Test Firm Email[email protected]
Certified ByBrian Chiang – Director
Comment [i53gS71e43qJIA2z51OqPQ==]: Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedure. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC