2AHLN201906FTX

FCC ID

Equipment: LTE Cat M1 module

Shenzhen Chen Er Technology Limited 201906FTX

Room 608,Block A,Changyuan New Material Port, No.2 Gaoxin Middle 1st Road,Yuehai Street,, Nanshan District, Shenzhen City,, N/A N/A China

Application
Frequency Range
Final Action Date
Granted
ib9L9e4n4W6OL+Ua3+KRvA==
699.7-715.3
2020-03-23
APPROVED
ib9L9e4n4W6OL+Ua3+KRvA==
779.5-784.5
2020-03-23
APPROVED
ib9L9e4n4W6OL+Ua3+KRvA==
824.7-848.3
2020-03-23
APPROVED
ib9L9e4n4W6OL+Ua3+KRvA==
1710.7-1754.3
2020-03-23
APPROVED
ib9L9e4n4W6OL+Ua3+KRvA==
1850.1-1914.9
2020-03-23
APPROVED
ib9L9e4n4W6OL+Ua3+KRvA==
1850.7-1909.3
2020-03-23
APPROVED
File NameDocument TypeDateDirect
User ManualUsers Manual 2020-03-23 00:00:00 pdf
LabelID Label/Location Info 2020-03-23 00:00:00 pdf
External PhotoExternal Photos 2020-03-23 00:00:00 pdf
Change ID request letter by original applicant(1)Cover Letter(s) 2020-03-23 00:00:00 pdf
Change ID request letter by new applicantCover Letter(s) 2020-03-23 00:00:00 pdf
POACover Letter(s) 2020-03-23 00:00:00 pdf

Application Details:

EquipmentLTE Cat M1 module
FRN0025357864
Grantee Code2AHLN
Product Code201906FTX
Applicant BusinessShenzhen Chen Er Technology Limited
Business AddressRoom 608,Block A,Changyuan New Material Port, No.2 Gaoxin Middle 1st Road,Yuehai Street,, Nanshan District, Shenzhen City,,N/A China
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
TCB Email[email protected]
ApplicantChao Chen – Manager
Applicant Phone
Applicant Fax0755-61624032
Applicant Email[email protected]
Applicant MailStop
Test FirmSGS-CSTC Standards Technical Services Co., Ltd.
Test Firm ContactJerry Chan
Test Firm Phone
Test Firm Fax86 (0) 20 82075059
Test Firm Email[email protected]
Certified ByJoyce Shi – Certification Executive
Comment [ib9L9e4n4W6OL+Ua3+KRvA==]: Single Modular Approval. Power listed is Conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of LTE B2 (8 dBi), LTE B4 (5 dBi), LTE B5 (9.42 dBi), LTE B12 (8.73 dBi), LTE B13 (9.17 dBi), LTE B25 (8 dBi). OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Change in identification as specified under 47CFR2.933 of the FCC rules.

© 2020 FCC.report
This site is not affiliated with or endorsed by the FCC