|Equipment||Bluetooth & ZigBee Module|
|Applicant Business||GL Technologies (Hong Kong) Limited|
|Business Address||Unit 210D, 2/F, Enterprise Place Hong Kong Science Park, Shatin, N.T., Hong Kong,N/A China |
|TCB Scope||A4: UNII devices & low power transmitters using spread spectrum techniques|
|TCB Email||[email protected]|
|Applicant||Alfie Zhao – |
|Applicant Phone|| |
|Applicant Fax||(+852) 60962240|
|Applicant Email||[email protected]|
|Test Firm||GRG Metrology & Test (Shenzhen) Co., Ltd.|
|Test Firm Contact||Edith Chen|
|Test Firm Phone|| |
|Test Firm Fax|
|Test Firm Email||[email protected]|
|Certified By||Alfie Zhao – |
Comment [+OOTNR0jlXuYDMJ8Mp1fXw==]: Output Power listed is the peak conducted.
Single Modular Approval for mobile RF Exposure condition.
The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
GL-EFR32H only installed host with pin interface.