|Applicant Business||Shenzhen Rakwireless Technology Co., Ltd.|
|Business Address||Room 506, Bldg B, New Compark, Pingshan First Road Taoyuan Street, XiLi town, Shenzhen,N/A China |
|TCB Scope||A4: UNII devices & low power transmitters using spread spectrum techniques|
|TCB Email||[email protected]|
|Applicant||duiyu ye – Engineer |
|Applicant Phone|| 803|
|Applicant Email||[email protected]|
|Test Firm||Shenzhen HUAK Testing Technology Co., Ltd.|
|Test Firm Contact||Jason Zhou|
|Test Firm Phone|| |
|Test Firm Fax|
|Test Firm Email||[email protected]|
|Certified By||duiyu ye – Engineer|
Comment [o2qAE6exppPWKlt4pbbP+Q==]: Single Modular Approval. Output Power listed is peak conducted. The device support Hybrid mode.
The maximum antenna gain is 3.0dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
The antenna used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC ID.
The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.