2AEZA-XC

FCC ID

Equipment: IP Camera

GUANGZHOU BOSMA TECHNOLOGY CO.,LTD -XC

Floor 3nd, Building A5, No.11, Kaiyuan Avenue, Guangzhou Hi-tech Industrial Development Zone, Guangzhou, N/A N/A China

Application
Frequency Range
Final Action Date
Granted
hXwQLkqN8R/x5y/5Sz74+A==
915.0-915.0
2019-09-09
APPROVED
CqXr+iROJ2modQB13u4lxw==
2412.0-2462.0
2019-09-09
APPROVED
CqXr+iROJ2modQB13u4lxw==
2422.0-2452.0
2019-09-09
APPROVED
File NameDocument TypeDateDirect
RF Exposure InfoRF Exposure Info 2019-09-09 00:00:00 pdf
Test ReportTest Report 2019-09-09 00:00:00 pdf
Test Setup photoTest Setup Photos 2019-09-09 00:00:00 pdf
Interal photoInternal Photos 2019-09-09 00:00:00 pdf
External photoExternal Photos 2019-09-09 00:00:00 pdf
User ManualUsers Manual 2019-09-09 00:00:00 pdf
LabelID Label/Location Info 2019-09-09 00:00:00 pdf
Confidentiality LetterCover Letter(s) 2019-09-09 00:00:00 pdf
POACover Letter(s) 2019-09-09 00:00:00 pdf
SchematicsSchematics N/A
Block DiagramBlock Diagram N/A
Operational DescriptionOperational Description N/A
SCHSchematics N/A

Application Details:

EquipmentIP Camera
FRN0024653610
Grantee Code2AEZA
Product Code-XC
Applicant BusinessGUANGZHOU BOSMA TECHNOLOGY CO.,LTD
Business AddressFloor 3nd, Building A5, No.11, Kaiyuan Avenue, Guangzhou Hi-tech Industrial Development Zone, Guangzhou,N/A China
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantAiqun Luo –
Applicant Phone
Applicant Fax020-32203099
Applicant Email[email protected]
Applicant MailStop
Test FirmSGS-CSTC Standards Technical Services Co., Ltd.
Test Firm ContactJerry Chan
Test Firm Phone
Test Firm Fax86 (0) 20 82075059
Test Firm Email[email protected]
Certified ByKobe Jian – Manager
Comment [CqXr+iROJ2modQB13u4lxw==]: Power Output listed is conducted. Device is an 802.11b/g/n device and enabled for 2.4GHz band as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC