2ADZRG140WH

FCC ID

Equipment: 7368 ISAM ONT G-140W-H

Nokia Shanghai Bell Co. Ltd. G140WH

No. 388, Ningqiao Rd. Pilot Free Trade Zone, Shanghai, N/A 201206 China

Application
Frequency Range
Final Action Date
Granted
zUP40u80leZ2s/iQX3es9g==
5180.0-5240.0
2019-11-06
APPROVED
zUP40u80leZ2s/iQX3es9g==
5260.0-5320.0
2019-11-06
APPROVED
zUP40u80leZ2s/iQX3es9g==
5500.0-5720.0
2019-11-06
APPROVED
zUP40u80leZ2s/iQX3es9g==
5745.0-5825.0
2019-11-06
APPROVED
O4PSJ1LQAieLQZLR9ZzBCw==
5180.0-5240.0
2019-08-12
APPROVED
O4PSJ1LQAieLQZLR9ZzBCw==
5745.0-5825.0
2019-08-12
APPROVED
fHq/r1llM7zwrQ8Qm2AOZA==
-
2019-08-12
APPROVED
RA0/YMdcofWtppXKSQBPUw==
2412.0-2462.0
2019-08-12
APPROVED
File NameDocument TypeDateDirect
G-140W-H_Expedited Review Candidates - Required Information_revised1021Cover Letter(s) 2019-11-06 00:00:00 pdf
Test Report_DFS masterTest Report 2019-11-06 00:00:00 pdf
Test Report-3Test Report 2019-11-06 00:00:00 pdf
Test Report-2Test Report 2019-11-06 00:00:00 pdf
Test Report-1Test Report 2019-11-06 00:00:00 pdf
Class II permissive change application letterCover Letter(s) 2019-11-06 00:00:00 pdf
ConfidentialityCover Letter(s) 2019-11-06 00:00:00 pdf
POACover Letter(s) 2019-11-06 00:00:00 pdf
Test Setup Photo_DFSTest Setup Photos 2019-11-06 00:00:00 pdf
Test Setup Photo_NIITest Setup Photos 2019-11-06 00:00:00 pdf
Test Report_NII-2Test Report 2019-08-12 00:00:00 pdf
Test Report_NII-1Test Report 2019-08-12 00:00:00 pdf
Test Setup Photos_NIITest Setup Photos 2019-08-12 00:00:00 pdf
Users ManualUsers Manual 2019-08-12 00:00:00 pdf
ID Label/Location InfoID Label/Location Info 2019-08-12 00:00:00 pdf
Internal PhotosInternal Photos 2019-08-12 00:00:00 pdf
External PhotosExternal Photos 2019-08-12 00:00:00 pdf
MPE ReportRF Exposure Info 2019-08-12 00:00:00 pdf
Request for ConfidentialityCover Letter(s) 2019-08-12 00:00:00 pdf
Test Setup Photos_DTSTest Setup Photos 2019-08-12 00:00:00 pdf
Test Report_DTSTest Report 2019-08-12 00:00:00 pdf
Test Setup Photos_JBPTest Setup Photos 2019-08-12 00:00:00 pdf
Test Report_JBPTest Report 2019-08-12 00:00:00 pdf
Block DiagramBlock Diagram N/A
NII Device SecurityOperational Description N/A
Operational DescriptionOperational Description N/A
SchematicsSchematics N/A
op.des_expedite review_revised1021Operational Description N/A
op.des_expedite review Candidates Information-2_revised1021Operational Description N/A
op.des_expedite review Candidates Information-1_revised1021Operational Description N/A

Application Details:

Equipment7368 ISAM ONT G-140W-H
FRN0024217564
Grantee Code2ADZR
Product CodeG140WH
Applicant BusinessNokia Shanghai Bell Co. Ltd.
Business AddressNo. 388, Ningqiao Rd. Pilot Free Trade Zone, Shanghai,N/A China 201206
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
TCB Email[email protected]
ApplicantYong Tu – Hardware Advisory engineer
Applicant Phone
Applicant Fax86-21-38430001-1119
Applicant Email[email protected]
Applicant MailStop
Test FirmTA Technology (Shanghai) Co., Ltd.
Test Firm ContactMr. Zhihui Liu
Test Firm Phone
Test Firm Fax
Test Firm Email[email protected]
Certified ByYong Tu – Hardware Manager
Comment [O4PSJ1LQAieLQZLR9ZzBCw==]: Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes.
Comment [RA0/YMdcofWtppXKSQBPUw==]: Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes.
Comment [zUP40u80leZ2s/iQX3es9g==]: Permissive II change: The frequency bands as listed are enabled via the software. Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna operating conditions for satisfying RF exposure compliance. This device has 20/40/80MHz bandwidth modes.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC