2ACYXRDT401B-NA

FCC ID

Equipment: LTE-FDD/HSPA MODULE

Roadefend Vision Technology (Shanghai) Co.,Ltd RDT401B-NA

Room 602 604, 1st Building, No. 65 Chifeng Road, shanghai, N/A 200092 China

Application
Frequency Range
Final Action Date
Granted
mfEC9d5PXLfzv/fLl/X8Fg==
700.5-714.5
2020-03-25
APPROVED
mfEC9d5PXLfzv/fLl/X8Fg==
701.5-713.5
2020-03-25
APPROVED
mfEC9d5PXLfzv/fLl/X8Fg==
704.0-711.0
2020-03-25
APPROVED
mfEC9d5PXLfzv/fLl/X8Fg==
826.4-846.6
2020-03-25
APPROVED
mfEC9d5PXLfzv/fLl/X8Fg==
1715.0-1750.0
2020-03-25
APPROVED
mfEC9d5PXLfzv/fLl/X8Fg==
1720.0-1745.0
2020-03-25
APPROVED
mfEC9d5PXLfzv/fLl/X8Fg==
1851.5-1908.5
2020-03-25
APPROVED
mfEC9d5PXLfzv/fLl/X8Fg==
1852.4-1907.6
2020-03-25
APPROVED
mfEC9d5PXLfzv/fLl/X8Fg==
1855.0-1905.0
2020-03-25
APPROVED
mfEC9d5PXLfzv/fLl/X8Fg==
1860.0-1900.0
2020-03-25
APPROVED
File NameDocument TypeDateDirect
ID Label and Label LocationID Label/Location Info 2020-03-25 00:00:00 pdf
External photosExternal Photos 2020-03-25 00:00:00 pdf
Request Change of IdentificationCover Letter(s) 2020-03-25 00:00:00 pdf
FCC ID Authorization letterCover Letter(s) 2020-03-25 00:00:00 pdf
Authorization Letter from Original GranteeCover Letter(s) 2020-03-25 00:00:00 pdf

Application Details:

EquipmentLTE-FDD/HSPA MODULE
FRN0023872476
Grantee Code2ACYX
Product CodeRDT401B-NA
Applicant BusinessRoadefend Vision Technology (Shanghai) Co.,Ltd
Business AddressRoom 602 604, 1st Building, No. 65 Chifeng Road, shanghai,N/A China 200092
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
TCB Email[email protected]
ApplicantHu Xiao jun – Manager
Applicant Phone
Applicant Fax86-021-55897356
Applicant Email[email protected]
Applicant MailStop
Test FirmBay Area Compliance Laboratories Corp. (Kunshan)
Test Firm ContactMr. John Chan
Test Firm Phone
Test Firm Fax
Test Firm Email[email protected]
Certified ByHu Xiaojun –
Comment [mfEC9d5PXLfzv/fLl/X8Fg==]: Single Modular Approval. Power out is conducted at the antenna terminal. ERP for Part 22/27 is 24.38 dBm/23.20 dBm and EIRP for Part 24/27 is 24.45 dBm/23.69dBm. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install the SIM7600A-H module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.57 dBi at Lower 700 MHz, 1.87 dBi at 1900 MHz, 3.49 dBi at 1700 MHz, 0.91 at 850 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 7 W erp Part 22, the 2 W eirp Part 24 and the 3W erp/ 1 W eirp Part 27, power limits. This device contains LTE/WCDMA functions that are not operational in U.S. Territories. This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15MHz and 20 MHz bandwidth modes for LTE Band 2, 4 and 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Band 12. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

© 2020 FCC.report
This site is not affiliated with or endorsed by the FCC