2ABV4SVC690

FCC ID

Equipment: HD WI-FI Doorbell

Southern Telecom Inc. SVC690

5601 1st Ave, 2nd Floor, Brooklyn, NY 11220 United States

Application
Frequency Range
Final Action Date
Granted
2haDsKxNhj3iIRX9lfI0PA==
2412.0-2462.0
2019-03-09
APPROVED
2haDsKxNhj3iIRX9lfI0PA==
2422.0-2452.0
2019-03-09
APPROVED
File NameDocument TypeDateDirect
User manualUsers Manual 2019-03-09 00:00:00 pdf
Test report-DTSTest Report 2019-03-09 00:00:00 pdf
Test setup photosTest Setup Photos 2019-03-09 00:00:00 pdf
RF exposure infoRF Exposure Info 2019-03-09 00:00:00 pdf
label and label locationID Label/Location Info 2019-03-09 00:00:00 pdf
PoACover Letter(s) 2019-03-09 00:00:00 pdf
FCC Confidentiality request letterCover Letter(s) 2019-03-09 00:00:00 pdf
Internal photosInternal Photos 2019-03-09 00:00:00 pdf
External photosExternal Photos 2019-03-09 00:00:00 pdf
Declaration Letter of Model DifferenceCover Letter(s) 2019-03-09 00:00:00 pdf
Declaration of Disable WLAN Channel 12 and 13Cover Letter(s) 2019-03-09 00:00:00 pdf
SchematicSchematics N/A
Block diagramBlock Diagram N/A
Operation DescriptionOperational Description N/A
Declaration concerning Antenna SpecificationOperational Description N/A

Application Details:

EquipmentHD WI-FI Doorbell
FRN0023372808
Grantee Code2ABV4
Product CodeSVC690
Applicant BusinessSouthern Telecom Inc.
Business Address5601 1st Ave, 2nd Floor, Brooklyn,New York United States 11220
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantMaggie Li –
Applicant Phone
Applicant Fax1646-502-5695
Applicant Email[email protected]
Applicant MailStop
Test FirmShenzhen United Testing Technology Co., Ltd.
Test Firm ContactLiu Ze
Test Firm Phone
Test Firm Fax
Test Firm Email[email protected]
Certified ByMaggie Li – Import Manager
Comment [2haDsKxNhj3iIRX9lfI0PA==]: Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC