2AAJFK-DB2

FCC ID

Equipment: Smart Doorbell

Shenzhen KEP Technology Co., Ltd. K-DB2

4th floor south, Building B20, Heng Feng Industrial Area, Xixiang Town, Bao'an District,, Shenzhen, N/A 518126 China

Application
Frequency Range
Final Action Date
Granted
JCPOO5aCui+9954fTg7Oow==
2412.0-2462.0
2019-06-11
APPROVED
JCPOO5aCui+9954fTg7Oow==
2422.0-2452.0
2019-06-11
APPROVED
File NameDocument TypeDateDirect
INT PHOInternal Photos 2019-06-11 00:00:00 pdf
DTS reportTest Report 2019-06-11 00:00:00 pdf
RF exposure letterRF Exposure Info 2019-06-11 00:00:00 pdf
UMUsers Manual 2019-06-11 00:00:00 pdf
Test setup phoTest Setup Photos 2019-06-11 00:00:00 pdf
LABEL AND LOCATIONID Label/Location Info 2019-06-11 00:00:00 pdf
EXT PHOExternal Photos 2019-06-11 00:00:00 pdf
FCC model difference letterAttestation Statements 2019-06-11 00:00:00 pdf
FCC authorization letterCover Letter(s) 2019-06-11 00:00:00 pdf
FCC confidence letterCover Letter(s) 2019-06-11 00:00:00 pdf
OPOperational Description N/A
SCHSchematics N/A
block diagramBlock Diagram N/A

Application Details:

EquipmentSmart Doorbell
FRN0022798078
Grantee Code2AAJF
Product CodeK-DB2
Applicant BusinessShenzhen KEP Technology Co., Ltd.
Business Address4th floor south, Building B20, Heng Feng Industrial Area, Xixiang Town, Bao'an District,, Shenzhen,N/A China 518126
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
Applicantyue zhang – manager
Applicant Phone
Applicant Fax86-0755-27845009
Applicant Email[email protected]
Applicant MailStop
Test FirmDongGuan ShuoXin Electronic Technology Co., Ltd.
Test Firm ContactTina Wu
Test Firm Phone
Test Firm Fax
Test Firm Emailmailto:[email protected]
Certified Byyue zhang –
Comment [JCPOO5aCui+9954fTg7Oow==]: Power listed is conducted. This device has a 20 MHz and 40 MHz bandwidth mode.The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC