Attachment Rad. Haz. Study

This document pretains to SES-MOD-20170915-01027 for Modification on a Satellite Earth Station filing.

IBFS_SESMOD2017091501027_1276519

RF RADIATION HAZARD ANALYSIS Exhibit #B Antenna Diameter, (D) = 1.8 meters / 5.9058 Feet Antenna Surface Area (Sa) = 2.5447 sq meters Subreflector Diameter (Ds) = 0.0000 centimeters Ku Wavelength at 14.250 GHz (LAMBDA) = 0.21038067 meters Power output of VPC Flange= 18.451 dB Path Loss to OMT (IL) = 2 dB Power at OMT, (P) = 44.17 Watts Antenna Gain at 14.250GHz (G) = 46.50 dBi (2 port antenna gain) Antenna Gain given in Power Ration, (Ges) = 4.47E+04 Antenna Aperture Efficiency (N) = 0.650 Region Radition Level Hazard Assessment Far Field, (Rf) = 9.240 meters / 30.32 Feet 183.868 mW/cm sq Potential Hazard Near Field, (Wf) = 3.850 meters / 12.632 Feet 4.513 mW/cm sq Potential Hazard Transition Region (Rt) equal to or less than Ru<Rt<Rf 4.513 mW/cm sq Potential Hazard Between Main Reflector N/A (no subreflector) and Subreflector (Ws) Main Reflector Region (Wm) 3.471 mW/cm sq Potential Hazard Power Density Between Reflector 1.736 mW/cm sq Potential Hazard and Ground Far Field Off Axis (WF) 1.839 mW/cm sq Potential Hazard Near Field Off Axis (WN) 0.045 mW/cm sq Meets ANSI Requirements Conclusion: Based on the above analysis, harmful areas of Radiation do exist in the areas around the antenna and in the path of the antenna toward the satellite that it is pointed at. The Area occupied by the general public will not exceed the ANSI limit of 1mW cm sq. because the antenna is mounted on top of the truck, which is at least 8 feet above the ground, and safety increases with look angles used by the Satellites in the United States on Dom. Sat. arch. The areas on the ground and behind the antenna are 100 times less power (20dB) when at a min. of the dia. of the reflector. This is reflected in the Off Axis figures as seen above (WF) & (WN). The SNG will be marked with the standard radiation hazard warnings, and on the antenna itself. The warning signs will warn personnel to avoid the area around and in front of the reflector when the transmitter is operating. To ensure compliance with safety limits, the earth station transmitter will be turned off and marked to remain off whenever maintenance and repair personnel are required to work in the areas of potential hazard as defined in the above study. Additionally, the earth station personnel will be trained to ensure that the antenna path is clear at all times while the transmitter is in operation. The only access to the roof of the truck is a ladder that is not accessible by the general public. Note: See Exhibit #Ba for how the above calculations were made.

Exhibit Ba Analysis on Non-Ionizing Radiation Antenna Diameter, (D) = D: = 1.8 meters D*3.281 = 5.906 Feet Antenna Surface Area, (Sa) = Sa: = p* D*D Sa = 2.545 sq meters 4 Subreflector Diameter, (Ds) = Ds: = 0 cm Ds*.3937 0.000 Inches Ds*Ds Area of Subreflector, (As) = As: = p* As= 0.000 sq meters 4 Center Frequency, (Cf) = Cf: = 14.250 GHz Wavelength at (Cf), (Lambda) = Lambda = 0.2103806709 meters Tansmit Power at HPA or VPC Flange, (P1) = P1= 70.00 watts P2:=log(p1)*10 P2= 18.451 dB Path Loss from HPA or VPC to OMT, (IL) = Loss: = 2 P3:= P2-Loss P3= 16.451 OMT Pwr in dB P3 P:= 10 P= 44.167 OMT Pwr in watts 10 Antenna Gain at (Cf), (Gain) = Gain: = 46.50 dBi Gain Antenna Gain Converted to Power Ratio (Ges)= Ges: = 10 Ges = 4.47E+04 Ratio 10 Antenna Aperture Efficiency, (n) = n: = 0.6500 .60 * (D*D) Rf = 9.240 meters Far Field (Rf) = Rf= Lambda Rf*3.281= 30.318 feet Ges*P Far Field Power Density (Wf) = Wf= * .1 Wf = 183.868 mw sq cm 4* p * (Rf*Rf) (D*D) Rn= 3.850 meters Near Field (Rn) = Rn= 4*Lambda Rf*3.281= 12.632 feet 16*n*P Near Field Power Density (Wn) = Wn= * .1 Wn = 4.513 mw sq cm p* (D*D) mw sq cm Transition Region (Rt) = Rt = Wn*1 Rt= 4.513 (Equal to or less than) 2*P Pwr Density at Sub Reflector (Ws) = Ws= *1000 Ws = N/A As Main Reflector Region Pwr Density (Wm) = Wm= 2*P *.1 Wm = 3.471 mw sq cm Sa Pwr Density between main reflector and P Wg= *.1 Wg = 1.736 mw sq cm ground (Wg) = Sa Far Field Off Axis (WF) = WF:= Wf*.01 WF = 1.839 mw sq cm Near Field Off Axis (WN) = WN:= Wn*.01 WN = 0.045 mw sq cm

Form 312 Blocks Information Project number: 4975 Customer: WMUR Customer Contact: Mike Saffell Date: 9/14/2017 Enter this information in the following FCC Form 312 Blocks Antenna Model AvL Model 1810K Amplifier Model HPAK2070ACXXXXX Nomenclature Value Unit of Measure Form 312 Block Power at OMT 44.167 watts B5(g) Total EIRP 62.95 dBw B5(h) Maximum EIRP Density toward the Horizon -7.95 dBw/4KHz B6(i) Maximum EIRP per Carrier 62.15 dBw B7(f) Maximum EIRP Density per Carrier 22.60 dBw/4KHz B7(g)

Variable Data Project number: 4975 Customer: WMUR Customer Contact: Mike Saffell Date: 9/14/2017 Required Data Antenna Model AvL Model 1810K Amplifier Model HPAK2070ACXXXXX Antenna Diameter (D) 1.80 meters Subreflector Diameter (Ds) 0.00 cm Center Frequency (Cf) 14.25 GHz (14.250 GHz for Ku-Band) Transmit Power at HPA or VPC Flange (P1) 70.00 watts Path Loss from HPA or VPC to OMT (IL) 2.00 dB (0.6 for Hub Mount, 2.0 for Rack Mount and Hub Mouned 4 Port) Antenna Gain at (Cf) (Gain) 46.50 dBi Antenna Aperture Efficiency (n) 0.65 Bandwidth of Transmission 9.00 MHz


Document Created: 2017-09-15 12:51:50
Document Modified: 2017-09-15 12:51:50
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC