Attachment RF Exposure Analysis

This document pretains to SES-MOD-20151222-00951 for Modification on a Satellite Earth Station filing.

IBFS_SESMOD2015122200951_1118268

FCC OET-65 RF Exposure Study - Satellite Uplink Facility
KING 5.6 meter Digital Ku-band uplink – Calculation for worst case roof-top exposure

FCC Maximum Permissible Exposure Levels                   Source                       Units
Public/uncontrolled area exposure limit                   47CFR §1.1310              1 mW/cm2
Occupational/controlled area exposure limit               47CFR §1.1310              5 mW/cm2

Input Data
Antenna Diameter                                          datasheet              560.0 cm
Antenna surface area                                      calculated          246301 cm2
Sub-reflector diameter                                    measured             50.800 cm
Sub-reflector area                                        calculated              2027 cm2
Feed flange diameter                                      measured             13.970 cm2
Feed flange area                                          calculated               153
Frequency                                                 (entry)               14250 MHz
Wavelength (speed of light = 299,792,458 m/s)             calculated             2.104 cm
Transmit power at flange                                  Application           23600 milliwatts
Antenna gain                                              datasheet              56.66 dBi
Antenna gain factor                                       calculated          463447
Height of base of antenna above ground/roof               measured                  0.6 m
Height of center of antenna above ground/roof             measured                  2.8 m
Minimum Elevation Angle                                   (entry)                   9.7 degrees
Minimum Elevation Angle                                   calculated          0.16930 radians
                                                                                                      FCC Maximum Permissible Exposure (MPE)
Results calculated using FCC Bulletin OET-65 (Edition 97-01 August 1997)                                Uncontrolled            Controlled
                                                                                               2
Maximum power density at antenna surface               Eq. 11 Pg 27               0.38 mW/cm          Below FCC MPE          Below FCC MPE
Power density at subreflector                          Eq. 11 Pg 27              46.58 mW/cm2         Potential Hazard       Potential Hazard
Power density at feed flange                           Eq. 11 Pg 27            615.87 mW/cm2          Potential Hazard       Potential Hazard
Extent of near-field                                   Eq. 12 Pg 27             37266 cm
Maximum near-field power density                       Eq. 13 Pg 28               0.25 mW/cm2         Below FCC MPE                Below FCC MPE
Aperture efficiency                                    Eq. 14 Pg 28               0.66
Distance to beginning of far-field                     Eq. 16 Pg 29          89437.87 cm
Power density at end of the transition regiion         Eq. 17 Pg 29               0.11 mW/cm2         Below FCC MPE                Below FCC MPE
Maximum far-field power density                        Eq. 18 Pg 29              0.109 mW/cm2         Below FCC MPE                Below FCC MPE

Main Beam Far-field region safe exposure distances
Minimum distance for public/uncontrolled exposure         Eq. 18 Pg 29         295.02 meters
   Height at minimum antenna elevation angle              calculated            52.51 meters
   Horizontal distance                                    calculated            290.8 meters

Minimum distance for occupational/controlled exposure     Eq. 18 Pg 29         131.94 meters
   Height at minimum antenna elevation angle              calculated            25.03 meters
   Horizontal distance                                    calculated           130.05 meters

Off-Axis Near Field/Transition Region safe exposure distances from antenna
(20 dB reduction in power density at distances greater
than one antenna diameter from the main beam center.)  OET-65 Pg 30
Maximum off-axis near field power density              Eq. 13 Pg 28            0.0025 mW/cm2          Below FCC MPE                Below FCC MPE
Public/uncontrolled exposure off-axis distance         Diam/or Eq 17               5.6 meters
Occupatonal/controlled exposure off-axis distance      Diam/or Eq 17               5.6 meters

Off-Axis Far Field safe exposure distances from the antenna
(Based on side lobe attenuation required by FCC 25.209(a)(2))
Angle off main beam axis (1 to 48 degrees)                (entry)                   5 degree(s)
     Off-axis antenna gain factor                         OET-65 Pg 30*            28
     Minimum distance for public/uncontrolled exposure    Eq. 18 Pg 29 **      894.38 meters
 * Gain converted from dBi to linear multiple
 ** If calculated distance is less than the start of the
   far field region, the distance to the start of the far
   field region is used.
                                                                                                   Prepared by Doug Lung, NBC Universal, December 14, 2015



Document Created: 2019-04-13 08:01:39
Document Modified: 2019-04-13 08:01:39

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC